[PATCH v1 1/3] dt-bindings: arm: Add binding document for Coresight Slave Register device.

[Rob Herring (Arm)]

On Tue, 18 Jun 2024 15:27:24 +0800, Jie Gan wrote:
> Add binding document for Coresight Slave Register device.
> 
> Add a new property to TMC, qcom,csr-atid-offset, to indicate which
> ATID registers will be used by the TMC ETR. Each TMC ETR device is
> associated with four ATID registers that are continuous in address.
> 
> Signed-off-by: Jie Gan <quic_jiegan at quicinc.com>
> ---
>  .../bindings/arm/arm,coresight-tmc.yaml       |  8 ++
>  .../bindings/arm/qcom,coresight-csr.yaml      | 76 +++++++++++++++++++
>  2 files changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-csr.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/qcom,coresight-csr.yaml: properties:clock-names: {'maxItems': 1, 'items': [{'const': 'apb_pclk'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Error: Documentation/devicetree/bindings/arm/qcom,coresight-csr.example.dts:43.3-44.1 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/arm/qcom,coresight-csr.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240618072726.3767974-2-quic_jiegan@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.