[PATCH 2/4] arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support
Frank Li
Frank.Li at nxp.com
Mon Jun 17 15:30:58 PDT 2024
Add pcie[0,1] and pcie-ep[0,1] support.
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
arch/arm64/boot/dts/freescale/imx95.dtsi | 134 +++++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index cc5e829e76cc5..1bbf9a0468f69 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1054,5 +1054,139 @@ smmu: iommu at 490d0000 {
status = "disabled";
};
};
+
+ pcie0: pcie at 4c300000 {
+ compatible = "fsl,imx95-pcie";
+ reg = <0 0x4c300000 0 0x10000>,
+ <0 0x60100000 0 0xfe00000>,
+ <0 0x4c360000 0 0x10000>,
+ <0 0x4c340000 0 0x2000>;
+ reg-names = "dbi", "config", "atu", "app";
+ ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+ <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ num-viewport = <8>;
+ interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+ assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+ assigned-clock-parents = <0>, <0>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ fsl,max-link-speed = <3>;
+ status = "disabled";
+ };
+
+ pcie0_ep: pcie-ep at 4c300000 {
+ compatible = "fsl,imx95-pcie-ep";
+ reg = <0 0x4c300000 0 0x10000>,
+ <0 0x4c360000 0 0x1000>,
+ <0 0x4c320000 0 0x1000>,
+ <0 0x4c340000 0 0x2000>,
+ <0 0x4c370000 0 0x10000>,
+ <0x9 0 1 0>;
+ reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma";
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+ assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+ assigned-clock-parents = <0>, <0>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ status = "disabled";
+ };
+
+ pcie1: pcie at 4c380000 {
+ compatible = "fsl,imx95-pcie";
+ reg = <0 0x4c380000 0 0x10000>,
+ <8 0x80100000 0 0xfe00000>,
+ <0 0x4c3e0000 0 0x10000>,
+ <0 0x4c3c0000 0 0x2000>;
+ reg-names = "dbi", "config", "atu", "app";
+ ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+ <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ num-viewport = <8>;
+ interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+ assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+ assigned-clock-parents = <0>, <0>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ fsl,max-link-speed = <3>;
+ status = "disabled";
+ };
+
+ pcie1_ep: pcie-ep at 4c380000 {
+ compatible = "fsl,imx95-pcie-ep";
+ reg = <0 0x4c380000 0 0x10000>,
+ <0 0x4c3e0000 0 0x1000>,
+ <0 0x4c3a0000 0 0x1000>,
+ <0 0x4c3c0000 0 0x2000>,
+ <0 0x4c3f0000 0 0x10000>,
+ <0xa 0 1 0>;
+ reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma";
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+ assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+ assigned-clock-parents = <0>, <0>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ status = "disabled";
+ };
};
};
--
2.34.1
More information about the linux-arm-kernel
mailing list