[PATCH v3 06/41] iio: adc: axp288_adc: make use of regmap_set_bits()

[Trevor Gamblin]

Instead of using regmap_update_bits() and passing the mask twice, use
regmap_set_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig at baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin at baylibre.com>
---
 drivers/iio/adc/axp288_adc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 49fff1cabd0d..f135cf2362df 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -247,8 +247,8 @@ static int axp288_adc_initialize(struct axp288_adc_info *info)
 		return ret;
 
 	/* Turn on the ADC for all channels except TS, leave TS as is */
-	return regmap_update_bits(info->regmap, AXP20X_ADC_EN1,
-				  AXP288_ADC_EN_MASK, AXP288_ADC_EN_MASK);
+	return regmap_set_bits(info->regmap, AXP20X_ADC_EN1,
+			       AXP288_ADC_EN_MASK);
 }
 
 static const struct iio_info axp288_adc_iio_info = {

-- 
2.45.2