[PATCH] iommu/arm-smmu: Pretty-print context fault related regs

[Robin Murphy]

On 04/06/2024 4:01 pm, Rob Clark wrote:
> From: Rob Clark <robdclark at chromium.org>
> 
> Parse out the bitfields for easier-to-read fault messages.
> 
> Signed-off-by: Rob Clark <robdclark at chromium.org>
> ---
> Stephen was wanting easier to read fault messages.. so I typed this up.
> 
> Resend with the new iommu list address
> 
>   drivers/iommu/arm/arm-smmu/arm-smmu.c | 53 +++++++++++++++++++++++++--
>   drivers/iommu/arm/arm-smmu/arm-smmu.h |  5 +++
>   2 files changed, 54 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> index c572d877b0e1..06712d73519c 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> @@ -411,6 +411,8 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>   	unsigned long iova;
>   	struct arm_smmu_domain *smmu_domain = dev;
>   	struct arm_smmu_device *smmu = smmu_domain->smmu;
> +	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
> +				      DEFAULT_RATELIMIT_BURST);
>   	int idx = smmu_domain->cfg.cbndx;
>   	int ret;
>   
> @@ -425,10 +427,53 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>   	ret = report_iommu_fault(&smmu_domain->domain, NULL, iova,
>   		fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
>   
> -	if (ret == -ENOSYS)
> -		dev_err_ratelimited(smmu->dev,
> -		"Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
> -			    fsr, iova, fsynr, cbfrsynra, idx);
> +	if (ret == -ENOSYS && __ratelimit(&rs)) {
> +		static const struct {
> +			u32 mask; const char *name;
> +		} fsr_bits[] = {
> +			{ ARM_SMMU_FSR_MULTI,  "MULTI" },
> +			{ ARM_SMMU_FSR_SS,     "SS"    },
> +			{ ARM_SMMU_FSR_UUT,    "UUT"   },
> +			{ ARM_SMMU_FSR_ASF,    "ASF"   },
> +			{ ARM_SMMU_FSR_TLBLKF, "TLBLKF" },
> +			{ ARM_SMMU_FSR_TLBMCF, "TLBMCF" },
> +			{ ARM_SMMU_FSR_EF,     "EF"     },
> +			{ ARM_SMMU_FSR_PF,     "PF"     },
> +			{ ARM_SMMU_FSR_AFF,    "AFF"    },
> +			{ ARM_SMMU_FSR_TF,     "TF"     },
> +		}, fsynr0_bits[] = {
> +			{ ARM_SMMU_FSYNR0_WNR,    "WNR"    },
> +			{ ARM_SMMU_FSYNR0_PNU,    "PNU"    },
> +			{ ARM_SMMU_FSYNR0_IND,    "IND"    },
> +			{ ARM_SMMU_FSYNR0_NSATTR, "NSATTR" },
> +			{ ARM_SMMU_FSYNR0_PTWF,   "PTWF"   },
> +			{ ARM_SMMU_FSYNR0_AFR,    "AFR"    },
> +		};
> +
> +		pr_err("%s %s: Unhandled context fault: fsr=0x%x (",
> +		       dev_driver_string(smmu->dev), dev_name(smmu->dev), fsr);
> +
> +		for (int i = 0, n = 0; i < ARRAY_SIZE(fsr_bits); i++) {
> +			if (fsr & fsr_bits[i].mask) {
> +				pr_cont("%s%s", (n > 0) ? "|" : "", fsr_bits[i].name);

Given that SMMU faults have a high likelihood of correlating with other 
errors, e.g. the initiating device also reporting that it got an abort 
back, this much pr_cont is a recipe for an unreadable mess. Furthermore, 
just imagine how "helpful" this would be when faults in two contexts are 
reported by two different CPUs at the same time ;)

I'd prefer to retain the original message as-is, so there is at least 
still an unambiguous "atomic" view of a fault's entire state, then 
follow it with a decode more in the style of arm64's ESR logging. TBH I 
also wouldn't disapprove of hiding the additional decode behind a 
command-line/runtime parameter, since a fault storm can cripple a system 
enough as it is, without making the interrupt handler spend even longer 
printing to a potentially slow console.

> +				n++;
> +			}
> +		}
> +
> +		pr_cont("), iova=0x%08lx, fsynr=0x%x (S1CBNDX=%u", iova, fsynr,
> +			(fsynr >> 16) & 0xff);

Please define all the bitfields properly (and I agree with Pranjal about 
the naming).

Thanks,
Robin.

> +
> +		for (int i = 0; i < ARRAY_SIZE(fsynr0_bits); i++) {
> +			if (fsynr & fsynr0_bits[i].mask) {
> +				pr_cont("|%s", fsynr0_bits[i].name);
> +			}
> +		}
> +
> +		pr_cont("|PLVL=%u), cbfrsynra=0x%x, cb=%d\n",
> +			fsynr & 0x3,   /* FSYNR0.PLV */
> +			cbfrsynra, idx);
> +
> +	}
>   
>   	arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
>   	return IRQ_HANDLED;
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> index 836ed6799a80..3b051273718b 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> @@ -223,6 +223,11 @@ enum arm_smmu_cbar_type {
>   
>   #define ARM_SMMU_CB_FSYNR0		0x68
>   #define ARM_SMMU_FSYNR0_WNR		BIT(4)
> +#define ARM_SMMU_FSYNR0_PNU		BIT(5)
> +#define ARM_SMMU_FSYNR0_IND		BIT(6)
> +#define ARM_SMMU_FSYNR0_NSATTR		BIT(8)
> +#define ARM_SMMU_FSYNR0_PTWF		BIT(10)
> +#define ARM_SMMU_FSYNR0_AFR		BIT(11)
>   
>   #define ARM_SMMU_CB_FSYNR1		0x6c
>