[PATCH v6,14/24] media: mediatek: vcodec: Add capture format to support one plane memory

Yunfei Dong (董云飞) Yunfei.Dong at mediatek.com
Mon Jun 17 02:44:42 PDT 2024


Hi Andrzej,

Thanks for your help to review this patch.

On Wed, 2024-05-22 at 14:26 +0200, Andrzej Pietrasiewicz wrote:
> Hi Yunfei,
> 
> W dniu 16.05.2024 o 14:20, Yunfei Dong pisze:
> > Define one uncompressed capture format V4L2_PIX_FMT_MS21 in order
> > to
> > support one plane memory. The buffer size is luma + chroma, luma is
> > stored at the start and chrome is stored at the end.
> > 
> > Signed-off-by: Yunfei Dong <yunfei.dong at mediatek.com>
> > ---
> >   Documentation/userspace-api/media/v4l/pixfmt-reserved.rst | 8
> > ++++++++
> >   drivers/media/v4l2-core/v4l2-common.c                     | 2 ++
> >   drivers/media/v4l2-core/v4l2-ioctl.c                      | 1 +
> >   include/uapi/linux/videodev2.h                            | 1 +
> >   4 files changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-
> > reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-
> > reserved.rst
> > index 886ba7b08d6b..6ec899649d50 100644
> > --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> > +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> > @@ -295,6 +295,14 @@ please make a proposal on the linux-media
> > mailing list.
> >         - Compressed format used by Nuvoton NPCM video driver. This
> > format is
> >           defined in Remote Framebuffer Protocol (RFC 6143, chapter
> > 7.7.4 Hextile
> >           Encoding).
> > +    * .. _V4L2-PIX-FMT-MS21:
> > +
> > +      - ``V4L2_PIX_FMT_MS21``
> > +      - 'MS21'
> > +      - This format has one plane, luma and chroma are stored in a
> > contiguous
> 
> Maybe s/one/single ?
> 
> > +        memory. Luma pixel in 16x32 tiles at the start, chroma
> > pixel in 16x16
> 
> maybe the word "pixel" is reduntant here? What else than pixels could
> tile sizes mean?
> Any padding between luma and chroma?
> 
The secure memory only has one plane: Luma data + Chrome data.

Luma data is in order of 16x32 block, chrome is in order of 16x16
block. Width and height is aligned with fixed value.

I need to re-write the description again.

Best Regards,
Yunfei Dong

> > +        tiles at the end. The image height must be aligned with 32
> > and the image
> > +        width must be aligned with 16.
> 
> Maybe aligned to?
> 
> >   .. raw:: latex
> >   
> >       \normalsize
> > diff --git a/drivers/media/v4l2-core/v4l2-common.c
> > b/drivers/media/v4l2-core/v4l2-common.c
> > index 4165c815faef..5ae54cf48dc7 100644
> > --- a/drivers/media/v4l2-core/v4l2-common.c
> > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > @@ -271,6 +271,8 @@ const struct v4l2_format_info
> > *v4l2_format_info(u32 format)
> >   		  .block_w = { 16, 8, 0, 0 }, .block_h = { 32, 16, 0, 0
> > }},
> >   		{ .format = V4L2_PIX_FMT_MT2110R, .pixel_enc =
> > V4L2_PIXEL_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 5,
> > 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2,
> >   		  .block_w = { 16, 8, 0, 0 }, .block_h = { 32, 16, 0, 0
> > }},
> > +		{ .format = V4L2_PIX_FMT_MS21, pixel_enc =
> > V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1,
> > 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2,
> > +		  .block_w = { 16, 8, 0, 0 }, .block_h = { 32, 16, 0, 0
> > }},
> >   
> >   		/* YUV planar formats */
> >   		{ .format = V4L2_PIX_FMT_NV12,    .pixel_enc =
> > V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1,
> > 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c
> > b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index 4c76d17b4629..3a68f2b9e7a4 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -1529,6 +1529,7 @@ static void v4l_fill_fmtdesc(struct
> > v4l2_fmtdesc *fmt)
> >   		case V4L2_PIX_FMT_MT2110T:	descr = "Mediatek 10bit
> > Tile Mode"; break;
> >   		case V4L2_PIX_FMT_MT2110R:	descr = "Mediatek 10bit
> > Raster Mode"; break;
> >   		case V4L2_PIX_FMT_HEXTILE:	descr = "Hextile Compressed
> > Format"; break;
> > +		case V4L2_PIX_FMT_MS21:		descr = "MediaTek
> > One Plane Format"; break;
> 
> s/One/Single ?
> 
> Regards,
> 
> Andrzej
> 
> >   		default:
> >   			if (fmt->description[0])
> >   				return;
> > diff --git a/include/uapi/linux/videodev2.h
> > b/include/uapi/linux/videodev2.h
> > index 89eb1a3c6555..7aff2f2c8f9c 100644
> > --- a/include/uapi/linux/videodev2.h
> > +++ b/include/uapi/linux/videodev2.h
> > @@ -800,6 +800,7 @@ struct v4l2_pix_format {
> >   #define V4L2_PIX_FMT_MM21     v4l2_fourcc('M', 'M', '2', '1') /*
> > Mediatek 8-bit block mode, two non-contiguous planes */
> >   #define V4L2_PIX_FMT_MT2110T  v4l2_fourcc('M', 'T', '2', 'T') /*
> > Mediatek 10-bit block tile mode */
> >   #define V4L2_PIX_FMT_MT2110R  v4l2_fourcc('M', 'T', '2', 'R') /*
> > Mediatek 10-bit block raster mode */
> > +#define V4L2_PIX_FMT_MS21     v4l2_fourcc('M', 'S', '2', '1') /*
> > MediaTek 8-bit block mode with one plane */
> >   #define V4L2_PIX_FMT_INZI     v4l2_fourcc('I', 'N', 'Z', 'I') /*
> > Intel Planar Greyscale 10-bit and Depth 16-bit */
> >   #define V4L2_PIX_FMT_CNF4     v4l2_fourcc('C', 'N', 'F', '4') /*
> > Intel 4-bit packed depth confidence information */
> >   #define V4L2_PIX_FMT_HI240    v4l2_fourcc('H', 'I', '2', '4') /*
> > BTTV 8-bit dithered RGB */
> 
> 


More information about the linux-arm-kernel mailing list