[PATCH 00/12] arm64: zynqmp: Update description for Kria

[Michal Simek]

On 5/27/24 11:34, Michal Simek wrote:
> Hi,
> 
> over last couple of months dt bindings have been updated but dtbs didn't
> reflect it that's why I have created this series to match description used
> in U-Boot to be able to switch to OF_UPSTREAM for ZynqMP platforms.
> There are still small missing part regarding usb peer hub and MTD layouts
> for other boards.
> The rest should be in sync already.
> 
> Thanks,
> Michal
> 
> 
> Michal Simek (9):
>    arm64: zynqmp: Align nvmem node with dt schema
>    arm64: zynqmp: Use fpga-region as node name
>    arm64: zynqmp: Add missing description for efuses
>    arm64: zynqmp: Describe USB wakeup interrupt
>    arm64: zynqmp: Describe OCM controller
>    arm64: zynqmp: Remove address/size-cells from ams node
>    arm64: zynqmp: Add compatible string for kv260
>    arm64: zynqmp: Add description for ina260 on kv260
>    arm64: zynqmp: Add support for K26 rev2 boards
> 
> Tejas Bhumkar (1):
>    arm64: zynqmp: Disable Tri-state for SDIO
> 
> Vishal Patel (1):
>    arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property
> 
> Vishal Sagar (1):
>    arm64: zynqmp: Describe DisplayPort connector for Kria
> 
>   .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 19 +++-
>   .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 41 ++++++++-
>   .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 19 +++-
>   .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts   |  8 +-
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 91 ++++++++++++++++---
>   5 files changed, 156 insertions(+), 22 deletions(-)
> 


Applied.
M