[PATCH v2 13/13] ARM: dts: imx6qdl-kontron-samx6i: add actual device trees
Shawn Guo
shawnguo2 at yeah.net
Sun Jun 16 18:51:20 PDT 2024
On Thu, Jun 06, 2024 at 11:02:06AM +0200, Michael Walle wrote:
> For now, there wasn't any in-tree users of the dtsi files for the
> Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a
> Kontron SMARC Eval 2.0 Carrier.
>
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> ---
> arch/arm/boot/dts/nxp/imx/Makefile | 2 +
> .../nxp/imx/imx6dl-kontron-samx6i-ads2.dts | 12 ++
> .../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts | 12 ++
> .../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi | 148 ++++++++++++++++++
> 4 files changed, 174 insertions(+)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index 231c0d73a53e..92e291603ea1 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -99,6 +99,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-icore.dtb \
> imx6dl-icore-mipi.dtb \
> imx6dl-icore-rqs.dtb \
> + imx6dl-kontron-samx6i-ads2.dtb \
> imx6dl-lanmcu.dtb \
> imx6dl-mamoj.dtb \
> imx6dl-mba6a.dtb \
> @@ -207,6 +208,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-icore-ofcap10.dtb \
> imx6q-icore-ofcap12.dtb \
> imx6q-icore-rqs.dtb \
> + imx6q-kontron-samx6i-ads2.dtb \
> imx6q-kp-tpc.dtb \
> imx6q-logicpd.dtb \
> imx6q-marsboard.dtb \
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
> new file mode 100644
> index 000000000000..6a0c53f23a15
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +
> +/dts-v1/;
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-kontron-samx6i.dtsi"
> +#include "imx6qdl-kontron-samx6i-ads2.dtsi"
> +
> +/ {
> + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
> + compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
> new file mode 100644
> index 000000000000..94c395cc020e
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: GPL-2.0 OR X11
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-kontron-samx6i.dtsi"
> +#include "imx6qdl-kontron-samx6i-ads2.dtsi"
> +
> +/ {
> + model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
> + compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
> new file mode 100644
> index 000000000000..15a87ee4159d
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
> + * 2.0 carrier (ADS2).
> + *
> + */
> +
> +/ {
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + sound {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&dailink_master>;
> + simple-audio-card,frame-master = <&dailink_master>;
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Line", "Line Out Jack",
> + "Microphone", "Microphone Jack",
> + "Line", "Line In Jack";
> + simple-audio-card,routing =
> + "Line Out Jack", "LINEOUTR",
> + "Line Out Jack", "LINEOUTL",
> + "Headphone Jack", "HPOUTR",
> + "Headphone Jack", "HPOUTL",
> + "IN1L", "Line In Jack",
> + "IN1R", "Line In Jack",
> + "Microphone Jack", "MICBIAS",
> + "IN2L", "Microphone Jack",
> + "IN2R", "Microphone Jack";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&ssi1>;
> + };
> +
> + dailink_master: simple-audio-card,codec {
> + sound-dai = <&wm8904>;
> + };
> + };
> +
> + reg_codec_mic: regulator-codec-mic {
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_MIC";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + reg_codec_1p8v: regulator-codec-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "V_1V8_S0_CODEC";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&audmux {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&can2 {
> + status = "okay";
> +};
> +
> +&ecspi4 {
> + flash at 1 {
> + compatible = "jedec,spi-nor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + reg = <1>;
compatible
reg
spi-max-frequency (generic properties)
m25p,fast-read (device or vendor specific ones)
> + };
> +};
> +
> +&fec {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + wm8904: audio-codec at 1a {
> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
Move #sound-dai-cells here?
Shawn
> + clocks = <&clks IMX6QDL_CLK_CKO2>;
> + clock-names = "mclk";
> + AVDD-supply = <®_codec_1p8v>;
> + CPVDD-supply = <®_codec_1p8v>;
> + DBVDD-supply = <®_codec_1p8v>;
> + DCVDD-supply = <®_codec_1p8v>;
> + MICVDD-supply = <®_codec_mic>;
> + };
> +};
> +
> +&i2c3 {
> + eeprom at 57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + };
> +};
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&ssi1 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "okay";
> +};
> +
> +&usbotg {
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + status = "okay";
> +};
> --
> 2.39.2
>
More information about the linux-arm-kernel
mailing list