[PATCH V3 2/2] arm64: dts: imx8mp-beacon-kit: Fix errors found from CHECK_DTBS

[Shawn Guo]

On Sat, Jun 01, 2024 at 02:43:07PM -0300, Fabio Estevam wrote:
> On Sat, Jun 1, 2024 at 10:52 AM Adam Ford <aford173 at gmail.com> wrote:
> 
> >         adv_bridge: hdmi at 3d {
> >                 compatible = "adi,adv7535";
> > -               reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
> > -               reg-names = "main", "cec", "edid", "packet";
> > +               reg = <0x3d>;
> > +               reg-names = "main";
> >                 interrupt-parent = <&gpio4>;
> >                 interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> >                 adi,dsi-lanes = <4>;
> >                 #sound-dai-cells = <0>;
> > +               avdd-supply = <&buck5>;
> > +               dvdd-supply = <&buck5>;
> > +               pvdd-supply = <&buck5>;
> > +               a2vdd-supply = <&buck5>;
> > +               v1p2-supply = <&buck5>;
> > +               v3p3-supply = <&buck4>;
> > +
> 
> The extra blank line is not needed.

Fixed it up and applied, thanks!