[PATCH v7 3/8] arm64: dts: ti: k3-j722s: Add main domain peripherals specific to J722S

[Siddharth Vadapalli]

Introduce the "k3-j722s-main.dtsi" file to contain main domain peripherals
that are specific to J722S SoC and are not shared with AM62P. The USB1
instance of the USB controller on J722S is different from that on AM62P.
Thus, add the USB1 node in "k3-j722s-main.dtsi".

Co-developed-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
Acked-by: Roger Quadros <rogerq at kernel.org>
---
v6:
https://lore.kernel.org/r/20240612132409.2477888-4-s-vadapalli@ti.com/
No changes since v6.

 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 40 +++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
new file mode 100644
index 000000000000..84378fc839d6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the J722S MAIN domain peripherals
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	usbss1: usb at f920000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x0f920000 0x00 0x100>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb at 31200000{
+			compatible = "cdns,usb3";
+			reg = <0x00 0x31200000 0x00 0x10000>,
+			      <0x00 0x31210000 0x00 0x10000>,
+			      <0x00 0x31220000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+};
-- 
2.40.1