[PATCH 2/2] arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node
Andrew Davis
afd at ti.com
Fri Jun 14 09:19:18 PDT 2024
On 6/14/24 2:44 AM, Jan Kiszka wrote:
> On 26.03.24 19:56, Andrew Davis wrote:
>> These SerDes lane select muxes use bits from the same register as
>> the SerDes clock select mux. Make the lane select mux a child
>> of the SerDes control node.
>>
>> This removes one more requirement on scm-conf being a syscon node
>> which will later be converted to fix a couple DTS check warnings.
>>
>> Signed-off-by: Andrew Davis <afd at ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 21 +++++++++++++--------
>> 1 file changed, 13 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> index 738c5c4acbcd2..5ce67e6a33600 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> @@ -66,7 +66,7 @@ serdes0: serdes at 900000 {
>> assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
>> ti,serdes-clk = <&serdes0_clk>;
>> #clock-cells = <1>;
>> - mux-controls = <&serdes_mux 0>;
>> + mux-controls = <&serdes0_mux 0>;
>> };
>>
>> serdes1: serdes at 910000 {
>> @@ -81,7 +81,7 @@ serdes1: serdes at 910000 {
>> assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
>> ti,serdes-clk = <&serdes1_clk>;
>> #clock-cells = <1>;
>> - mux-controls = <&serdes_mux 1>;
>> + mux-controls = <&serdes1_mux 0>;
>> };
>>
>> main_uart0: serial at 2800000 {
>> @@ -485,18 +485,23 @@ scm_conf: scm-conf at 100000 {
>> serdes0_clk: clock at 4080 {
>> compatible = "ti,am654-serdes-ctrl", "syscon";
>> reg = <0x4080 0x4>;
>> +
>> + serdes0_mux: mux-controller {
>> + compatible = "mmio-mux";
>> + #mux-control-cells = <1>;
>> + mux-reg-masks = <0x0 0x3>; /* lane select */
>> + };
>> };
>>
>> serdes1_clk: clock at 4090 {
>> compatible = "ti,am654-serdes-ctrl", "syscon";
>> reg = <0x4090 0x4>;
>> - };
>>
>> - serdes_mux: mux-controller {
>> - compatible = "mmio-mux";
>> - #mux-control-cells = <1>;
>> - mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
>> - <0x4090 0x3>; /* SERDES1 lane select */
>> + serdes1_mux: mux-controller {
>> + compatible = "mmio-mux";
>> + #mux-control-cells = <1>;
>> + mux-reg-masks = <0x0 0x3>; /* lane select */
>> + };
>> };
>>
>> dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0 {
>
> This change breaks serdes setup on the IOT2050 SM (k3-am6548-iot2050-
> advanced-sm.dts), possibly on more of our devices as well:
>
> platform 5500000.pcie: deferred probe pending: platform: supplier 900000.serdes not ready
> platform 900000.serdes: deferred probe pending: (reason unknown)
>
> And PCI remains unavailable. Digging a bit into it, it seems the change
> is causing a circular consumer/provider dependency between serdes0 and
> serdes1:
>
> root at iot2050-debian:~# ls -l /sys/bus/platform/devices/900000.serdes/
> total 0
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 consumer:platform:5500000.pcie -> ../../../virtual/devlink/platform:900000.serdes--platform:5500000.pcie
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 consumer:platform:910000.serdes -> ../../../virtual/devlink/platform:900000.serdes--platform:910000.serdes
> -rw-r--r-- 1 root root 4096 Jun 14 07:10 driver_override
> -r--r--r-- 1 root root 4096 Jun 14 07:10 modalias
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 of_node -> ../../../../firmware/devicetree/base/bus at 100000/serdes at 900000
> drwxr-xr-x 2 root root 0 Jun 14 07:10 power
> lrwxrwxrwx 1 root root 0 Jun 14 07:00 subsystem -> ../../../../bus/platform
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:44083000.system-controller:clock-controller -> ../../../virtual/devlink/platform:44083000.system-controller:clock-controller--platform:900000.serdes
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:44083000.system-controller:power-controller -> ../../../virtual/devlink/platform:44083000.system-controller:power-controller--platform:900000.serdes
> lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:910000.serdes -> ../../../virtual/devlink/platform:910000.serdes--platform:900000.serdes
> -rw-r--r-- 1 root root 4096 Jun 14 07:00 uevent
> -r--r--r-- 1 root root 4096 Jun 14 07:10 waiting_for_supplier
> root at iot2050-debian:~# ls -l /sys/bus/platform/devices/910000.serdes/
> total 0
> lrwxrwxrwx 1 root root 0 Jun 14 07:14 consumer:platform:900000.serdes -> ../../../virtual/devlink/platform:910000.serdes--platform:900000.serdes
> -rw-r--r-- 1 root root 4096 Jun 14 07:14 driver_override
> -r--r--r-- 1 root root 4096 Jun 14 07:14 modalias
> lrwxrwxrwx 1 root root 0 Jun 14 07:14 of_node -> ../../../../firmware/devicetree/base/bus at 100000/serdes at 910000
> drwxr-xr-x 2 root root 0 Jun 14 07:14 power
> lrwxrwxrwx 1 root root 0 Jun 14 07:00 subsystem -> ../../../../bus/platform
> lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:44083000.system-controller:clock-controller -> ../../../virtual/devlink/platform:44083000.system-controller:clock-controller--platform:910000.serdes
> lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:44083000.system-controller:power-controller -> ../../../virtual/devlink/platform:44083000.system-controller:power-controller--platform:910000.serdes
> lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:900000.serdes -> ../../../virtual/devlink/platform:900000.serdes--platform:910000.serdes
> -rw-r--r-- 1 root root 4096 Jun 14 07:00 uevent
> -r--r--r-- 1 root root 4096 Jun 14 07:14 waiting_for_supplier
>
> Note that we normally disable serdes1 on this device as it was not
> required so far. Enabling the node does not solve the issue, though:
>
> platform 5500000.pcie: deferred probe pending: platform: supplier 900000.serdes not ready
> platform 900000.serdes: deferred probe pending: (reason unknown)
> platform 910000.serdes: deferred probe pending: (reason unknown)
>
Thanks for the report, I think I know the issue and can
send the fix here in a bit. In the mean time, could you
see if the following fixes the issue (this isn't fully
correct and will cause a new DTB check warning, but will
let me verify the issue):
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 1af3dedde1f67..06ed74197f893 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -478,7 +478,7 @@ scm_conf: scm-conf at 100000 {
ranges = <0x0 0x0 0x00100000 0x1c000>;
serdes0_clk: clock at 4080 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4080 0x4>;
serdes0_mux: mux-controller {
@@ -489,7 +489,7 @@ serdes0_mux: mux-controller {
};
serdes1_clk: clock at 4090 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4090 0x4>;
serdes1_mux: mux-controller {
Thanks,
Andrew
> Jan
>
More information about the linux-arm-kernel
mailing list