[RFC PATCH v1 0/2] KVM: arm64: Making BT Field in ID_AA64PFR1_EL1 writable

[Shaoqin Huang]

Hi Marc,

On 6/12/24 18:07, Marc Zyngier wrote:
> On Wed, 12 Jun 2024 06:30:51 +0100,
> Oliver Upton <oliver.upton at linux.dev> wrote:
>>
>> Hi Shaoqin,
>>
>> On Tue, Jun 11, 2024 at 10:35:50PM -0400, Shaoqin Huang wrote:
>>> Hi guys,
>>>
>>> I'm trying to enable migration from MtCollins(Ampere Altra, ARMv8.2+) to
>>> AmpereOne(AmpereOne, ARMv8.6+), the migration always fails when migration from
>>> MtCollins to AmpereOne due to some register fields differing between the
>>> two machines.
>>>
>>> In this patch series, we try to make more register fields writable like
>>> ID_AA64PFR1_EL1.BT. This is first step towards making the migration possible.
>>> Some other hurdles need to be overcome. This is not sufficient to make the
>>> migration successful from MtCollins to AmpereOne.
>>
>> It isn't possible to transparently migrate between these systems. The
>> former has a cntfrq of 25MHz, and the latter has a cntfrq of 1GHz. There
>> isn't a mechanism for scaling the counter frequency, and I have zero
>> appetite for a paravirt interface.
> 
> Note that there *is* an architectural workaround in the form of
> FEAT_CNTSC. But of course:
> 
> - it is optional (and likely not implemented)
> - it is global (hence affecting all SW running on the machine)
> - it invalidates the requirements of ARMv8.6 (who cares?)
> - KVM has nothing to do with it (yay!)
> 
> So if the two systems (from the same manufacturer) were ever designed
> to allow migration between the two, they would have at least baked
> some of that in.
> 
> As for the paravirt interface, I agree that this is a non-starter
> (been there, done that, dumped it in the bin).
> 
> The patch itself is interesting and may be of use once it has been put
> to a compiler and not just dumped on the list without any testing.
> 
> 	M.

Thanks for putting your comments here.

If we don't care about the FEAT_CNTSC right now. Could I fix the compile 
issue and respin this again without the background of enabling migration 
between MtCollins and AmpereOne, and just keep the information of the 
different BT field between different machine?

Thanks,
Shaoqin

> 

-- 
Shaoqin