[PATCH v7 4/5] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
Shengjiu Wang
shengjiu.wang at nxp.com
Wed Jun 12 18:51:21 PDT 2024
Add CLK_SET_RATE_PARENT flags that when the device driver sets the
child clock rate, parent clock frequency can be refined accordingly.
Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
drivers/clk/imx/clk-imx8mp-audiomix.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
index 517b1f88661b..7fd336a96cfe 100644
--- a/drivers/clk/imx/clk-imx8mp-audiomix.c
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -328,12 +328,12 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(sels); i++) {
if (sels[i].num_parents == 1) {
hw = devm_clk_hw_register_gate_parent_data(dev,
- sels[i].name, &sels[i].parent, 0,
+ sels[i].name, &sels[i].parent, CLK_SET_RATE_PARENT,
base + sels[i].reg, sels[i].shift, 0, NULL);
} else {
hw = devm_clk_hw_register_mux_parent_data_table(dev,
sels[i].name, sels[i].parents,
- sels[i].num_parents, 0,
+ sels[i].num_parents, CLK_SET_RATE_PARENT,
base + sels[i].reg,
sels[i].shift, sels[i].width,
0, NULL, NULL);
@@ -376,7 +376,8 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS] = hw;
hw = devm_clk_hw_register_gate(dev, "sai_pll_out", "sai_pll_bypass",
- 0, base + SAI_PLL_GNRL_CTL, 13,
+ CLK_SET_RATE_PARENT,
+ base + SAI_PLL_GNRL_CTL, 13,
0, NULL);
if (IS_ERR(hw)) {
ret = PTR_ERR(hw);
@@ -385,7 +386,8 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT] = hw;
hw = devm_clk_hw_register_fixed_factor(dev, "sai_pll_out_div2",
- "sai_pll_out", 0, 1, 2);
+ "sai_pll_out",
+ CLK_SET_RATE_PARENT, 1, 2);
if (IS_ERR(hw)) {
ret = PTR_ERR(hw);
goto err_clk_register;
--
2.34.1
More information about the linux-arm-kernel
mailing list