[PATCH] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors

[Andrew Davis]

The SK-AM64 board has two TMP100 temperature sensors, add these here.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 5b028b3a3192f..44ecbcf1c8447 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -430,6 +430,18 @@ exp2: gpio at 60 {
 		#gpio-cells = <2>;
 		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
 	};
+
+	/* SoC power supply temperature */
+	tmp100 at 48 {
+		compatible = "ti,tmp100";
+		reg = <0x48>;
+	};
+
+	/* DDR power supply temperature */
+	tmp100 at 49 {
+		compatible = "ti,tmp100";
+		reg = <0x49>;
+	};
 };
 
 /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
-- 
2.39.2