[PATCH net-next v3 4/4] arm64: dts: ti: iot2050: Add IEP interrupts for SR1.0 devices

[Vignesh Raghavendra]

On 07/06/24 18:32, Diogo Ivo wrote:
> Add the interrupts needed for PTP Hardware Clock support via IEP
> in SR1.0 devices.
> 
> Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>
> Signed-off-by: Diogo Ivo <diogo.ivo at siemens.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
> index ef7897763ef8..0a29ed172215 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
> @@ -73,3 +73,15 @@ &icssg0_eth {
>  		    "rx0", "rx1",
>  		    "rxmgm0", "rxmgm1";
>  };
> +
> +&icssg0_iep0 {
> +	interrupt-parent = <&icssg0_intc>;
> +	interrupts = <7 7 7>;
> +	interrupt-names = "iep_cap_cmp";

I dont see these documented in the binding:
Documentation/devicetree/bindings/net/ti,icss-iep.yaml

> +};
> +
> +&icssg0_iep1 {
> +	interrupt-parent = <&icssg0_intc>;
> +	interrupts = <56 8 8>;
> +	interrupt-names = "iep_cap_cmp";
> +};
> 

-- 
Regards
Vignesh