[PATCH v11 6/6] iommu/arm-smmu: add support for PRR bit setup

[Rob Clark]

On Wed, Jun 5, 2024 at 5:18 AM Bibek Kumar Patro
<quic_bibekkum at quicinc.com> wrote:
>
> Add an adreno-smmu-priv interface for drm/msm to call
> into arm-smmu-qcom and initiate the PRR bit setup or reset
> sequence as per request.
>
> This will be used by GPU side to setup the PRR bit and
> related configuration registers through adreno-smmu private
> interface instead of directly poking the smmu hardware.
>
> Signed-off-by: Bibek Kumar Patro <quic_bibekkum at quicinc.com>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 21 +++++++++++++++++++++
>  drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
>  include/linux/adreno-smmu-priv.h           |  5 ++++-
>  3 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 8dabc26fa10e..2f4ee22f740a 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -28,6 +28,7 @@
>  #define PREFETCH_SHALLOW       (1 << PREFETCH_SHIFT)
>  #define PREFETCH_MODERATE      (2 << PREFETCH_SHIFT)
>  #define PREFETCH_DEEP          (3 << PREFETCH_SHIFT)
> +#define GFX_ACTLR_PRR          (1 << 5)
>
>  static const struct actlr_config sc7280_apps_actlr_cfg[] = {
>         { 0x0800, 0x24e1, PREFETCH_DEFAULT | CMTLB },
> @@ -212,6 +213,25 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
>         arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
>  }
>
> +static void qcom_adreno_smmu_set_actlr_bit(const void *cookie, phys_addr_t page_addr, bool set)
> +{

_set_actlr_bit() is a bit more of an implementation detail.  Maybe
_set_prr() would be a better name?

Also, the version of this patch that I typed up (but haven't sent to
list yet) took a `struct page *` instead of a phys_addr_t.. passing
NULL would disable PRR, so I didn't need the third arg

> +       struct arm_smmu_domain *smmu_domain = (void *)cookie;
> +       struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> +       struct arm_smmu_device *smmu = smmu_domain->smmu;
> +       u32 reg = 0;
> +
> +       writel_relaxed(lower_32_bits(page_addr),
> +                               (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_LADDR);
> +
> +       writel_relaxed(upper_32_bits(page_addr),
> +                               (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_UADDR);

I know downstream writes it as upper+lower, but I'd guess we could
just writeq, couldn't we?

> +
> +       reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
> +       reg |= FIELD_PREP(GFX_ACTLR_PRR, set ? 1 : 0);

this won't clear the ENABLE_PRR bit if we try to disable it after
enabling (unless this bit is read-as-zero

Also, can we give a name to PRR?  I'm guessing it is something like
physical-range-remap?

BR,
-R

> +       arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
> +
> +}
> +
>  #define QCOM_ADRENO_SMMU_GPU_SID 0
>
>  static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
> @@ -384,6 +404,7 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
>         priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
>         priv->set_stall = qcom_adreno_smmu_set_stall;
>         priv->resume_translation = qcom_adreno_smmu_resume_translation;
> +       priv->set_actlr_bit = qcom_adreno_smmu_set_actlr_bit;
>
>         actlrvar = qsmmu->data->actlrvar;
>         if (!actlrvar)
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> index d9c2ef8c1653..3076bef49e20 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> @@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
>  #define ARM_SMMU_SCTLR_M               BIT(0)
>
>  #define ARM_SMMU_CB_ACTLR              0x4
> +#define ARM_SMMU_GFX_PRR_CFG_LADDR     0x6008
> +#define ARM_SMMU_GFX_PRR_CFG_UADDR     0x600C
>
>  #define ARM_SMMU_CB_RESUME             0x8
>  #define ARM_SMMU_RESUME_TERMINATE      BIT(0)
> diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
> index c637e0997f6d..448e191eeb52 100644
> --- a/include/linux/adreno-smmu-priv.h
> +++ b/include/linux/adreno-smmu-priv.h
> @@ -49,7 +49,9 @@ struct adreno_smmu_fault_info {
>   *                 before set_ttbr0_cfg().  If stalling on fault is enabled,
>   *                 the GPU driver must call resume_translation()
>   * @resume_translation: Resume translation after a fault
> - *
> + * @set_actlr_bits: Extendible interface to be used  by GPU to modify the
> + *                 ACTLR bits, currently used to intitate PRR bit setup or
> + *                 reset sequence for ACTLR registers as requested.
>   *
>   * The GPU driver (drm/msm) and adreno-smmu work together for controlling
>   * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
> @@ -67,6 +69,7 @@ struct adreno_smmu_priv {
>      void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
>      void (*set_stall)(const void *cookie, bool enabled);
>      void (*resume_translation)(const void *cookie, bool terminate);
> +    void (*set_actlr_bit)(const void *cookie, phys_addr_t page_addr, bool set);
>  };
>
>  #endif /* __ADRENO_SMMU_PRIV_H */
> --
> 2.34.1
>