[net-next,PATCH v6 0/8] Series to deliver Ethernet for STM32MP13

[Christophe Roullier]

STM32MP13 is STM32 SOC with 2 GMACs instances
    GMAC IP version is SNPS 4.20.
    GMAC IP configure with 1 RX and 1 TX queue.
    DMA HW capability register supported
    RX Checksum Offload Engine supported
    TX Checksum insertion supported
    Wake-Up On Lan supported
    TSO supported
Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)

V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
      Remark from Serge Semin (upate commits msg)
V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
      manage PHY regulator (in glue or PHY side)
    - Integrate RFC from Marek
    - Remark from Rob Herring in YAML documentation
V4: - Remark from Marek (remove max-speed, extra space in DT, update commit msg)
    - Remark from Rasmus (add sign-off, add base-commit)
    - Remark from Sai Krishna Gajula
V5: - Fix warning during build CHECK_DTBS
    - Remark from Marek (glue + DT update)
    - Remark from Krzysztof about YAML (Make it symmetric)
V6: - Replace pr_debug by dev_dbg
    - Split serie driver/DTs separately 

Christophe Roullier (3):
  dt-bindings: net: add STM32MP13 compatible in documentation for stm32
  net: stmmac: dwmac-stm32: Mask support for PMCR configuration
  net: stmmac: dwmac-stm32: add management of stm32mp13 for stm32

Marek Vasut (5):
  net: stmmac: dwmac-stm32: Separate out external clock rate validation
  net: stmmac: dwmac-stm32: Separate out external clock selector
  net: stmmac: dwmac-stm32: Extract PMCR configuration
  net: stmmac: dwmac-stm32: Clean up the debug prints
  net: stmmac: dwmac-stm32: Fix Mhz to MHz

 .../devicetree/bindings/net/stm32-dwmac.yaml  |  43 ++++-
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 174 +++++++++++++-----
 2 files changed, 169 insertions(+), 48 deletions(-)


base-commit: 28f961f9d5b7c3d9b9f93cc59e54477ba1278cf9
-- 
2.25.1