[PATCH v5 09/12] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13

[Marek Vasut]

On 6/7/24 11:57 AM, Christophe Roullier wrote:

[...]

> @@ -1505,6 +1511,38 @@ sdmmc2: mmc at 58007000 {
>   				status = "disabled";
>   			};
>   
> +			ethernet1: ethernet at 5800a000 {
> +				compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
> +				reg = <0x5800a000 0x2000>;
> +				reg-names = "stmmaceth";
> +				interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&exti 68 1>;
> +				interrupt-names = "macirq", "eth_wake_irq";
> +				clock-names = "stmmaceth",
> +					      "mac-clk-tx",
> +					      "mac-clk-rx",
> +					      "ethstp",
> +					      "eth-ck";
> +				clocks = <&rcc ETH1MAC>,
> +					 <&rcc ETH1TX>,
> +					 <&rcc ETH1RX>,
> +					 <&rcc ETH1STP>,
> +					 <&rcc ETH1CK_K>;
> +				st,syscon = <&syscfg 0x4 0xff0000>;
> +				snps,mixed-burst;
> +				snps,pbl = <2>;
> +				snps,axi-config = <&stmmac_axi_config_1>;
> +				snps,tso;
> +				access-controllers = <&etzpc 48>;

Keep the list sorted.