[PATCH 7/7] arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

Peng Fan peng.fan at nxp.com
Thu Jun 6 18:40:23 PDT 2024


> Subject: [PATCH 7/7] arm64: dts: imx8qm-mek: add usb 3.0 and related type
> C nodes
> 
> Enable usb3.0 and related usb type C nodes.
> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 87
> ++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index dedcc1b1bf12f..f6e2f1573f6ab 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -7,6 +7,7 @@
>  /dts-v1/;
> 
>  #include "imx8qm.dtsi"
> +#include "dt-bindings/usb/pd.h"

#include <dt-bindings/usb/pd.h> ? and move before "imx8qm.dtsi" ?

> 
>  / {
>  	model = "Freescale i.MX8QM MEK";
> @@ -129,6 +130,21 @@ lvds_backlight1: backlight-lvds1 {
>  		default-brightness-level = <80>;
>  	};
> 
> +	gpio-sbu-mux {

use mux-controller?

Regards,
Peng


More information about the linux-arm-kernel mailing list