[PATCH 1/3] arm64: dts: freescale: use defines for interrupts
Peng Fan
peng.fan at nxp.com
Wed Jun 5 18:36:38 PDT 2024
> Subject: [PATCH 1/3] arm64: dts: freescale: use defines for interrupts
>
> Replace hard-coded interrupt parts (GIC, flags) with standard defines for
> readability. No changes in resulting DTBs.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 54 +++----
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +-
> .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 108 +++++++-------
> .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
> .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 48 +++----
> .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 +-
> .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 2 +-
> .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 136 +++++++++---------
> .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 4 +-
> 9 files changed, 181 insertions(+), 181 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> index a0f7bbd691a0..cfb77a76a240 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> @@ -74,15 +74,15 @@ coreclk: coreclk {
>
> timer {
> compatible = "arm,armv8-timer";
> - interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure
> PPI */
> - <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-
> Secure PPI */
> - <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
> - <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI
> */
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Secure PPI */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Non-Secure PPI */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual
> PPI */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/*
> Hypervisor PPI */
> };
>
> pmu {
> compatible = "arm,cortex-a53-pmu";
> - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gic: interrupt-controller at 1400000 {
> @@ -93,7 +93,7 @@ gic: interrupt-controller at 1400000 {
> <0x0 0x1402000 0 0x2000>, /* GICC */
> <0x0 0x1404000 0 0x2000>, /* GICH */
> <0x0 0x1406000 0 0x2000>; /* GICV */
> - interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> };
>
> reboot {
> @@ -159,7 +159,7 @@ QORIQ_CLK_PLL_DIV(1)>,
> esdhc0: esdhc at 1560000 {
> compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
> reg = <0x0 0x1560000 0x0 0x10000>;
> - interrupts = <0 62 0x4>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> voltage-ranges = <1800 1800 3300 3300>; @@ -
> 178,7 +178,7 @@ scfg: scfg at 1570000 {
> esdhc1: esdhc at 1580000 {
> compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
> reg = <0x0 0x1580000 0x0 0x10000>;
> - interrupts = <0 65 0x4>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> voltage-ranges = <1800 1800 3300 3300>; @@ -
> 305,7 +305,7 @@ clockgen: clocking at 1ee1000 {
> tmu: tmu at 1f00000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f00000 0x0 0x10000>;
> - interrupts = <0 33 0x4>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x60062>;
> fsl,tmu-calibration =
> <0x00000000 0x00000025>,
> @@ -355,7 +355,7 @@ i2c0: i2c at 2180000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2180000 0x0 0x10000>;
> - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> scl-gpios = <&gpio0 2 0>;
> @@ -367,7 +367,7 @@ i2c1: i2c at 2190000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2190000 0x0 0x10000>;
> - interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> scl-gpios = <&gpio0 13 0>;
> @@ -379,7 +379,7 @@ dspi: spi at 2100000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2100000 0x0 0x10000>;
> - interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "dspi";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -391,7 +391,7 @@ dspi: spi at 2100000 {
> duart0: serial at 21c0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0500 0x0 0x100>;
> - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> status = "disabled";
> @@ -400,7 +400,7 @@ duart0: serial at 21c0500 {
> duart1: serial at 21c0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0600 0x0 0x100>;
> - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> status = "disabled";
> @@ -409,7 +409,7 @@ duart1: serial at 21c0600 {
> gpio0: gpio at 2300000 {
> compatible = "fsl,qoriq-gpio";
> reg = <0x0 0x2300000 0x0 0x10000>;
> - interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -419,7 +419,7 @@ gpio0: gpio at 2300000 {
> gpio1: gpio at 2310000 {
> compatible = "fsl,qoriq-gpio";
> reg = <0x0 0x2310000 0x0 0x10000>;
> - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -430,7 +430,7 @@ wdog0: watchdog at 2ad0000 {
> compatible = "fsl,ls1012a-wdt",
> "fsl,imx21-wdt";
> reg = <0x0 0x2ad0000 0x0 0x10000>;
> - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> big-endian;
> };
> @@ -439,7 +439,7 @@ sai1: sai at 2b50000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> reg = <0x0 0x2b50000 0x0 0x10000>;
> - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>,
> <&clockgen QORIQ_CLK_PLATFORM_PLL
> @@ -459,7 +459,7 @@ sai2: sai at 2b60000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> reg = <0x0 0x2b60000 0x0 0x10000>;
> - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>,
> <&clockgen QORIQ_CLK_PLATFORM_PLL
> @@ -481,8 +481,8 @@ edma0: dma-controller at 2c00000 {
> reg = <0x0 0x2c00000 0x0 0x10000>,
> <0x0 0x2c10000 0x0 0x10000>,
> <0x0 0x2c20000 0x0 0x10000>;
> - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
> - <0 103 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "edma-tx", "edma-err";
> dma-channels = <32>;
> big-endian;
> @@ -496,7 +496,7 @@ QORIQ_CLK_PLL_DIV(4)>,
> usb0: usb at 2f00000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x2f00000 0x0 0x10000>;
> - interrupts = <0 60 0x4>;
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -509,7 +509,7 @@ sata: sata at 3200000 {
> reg = <0x0 0x3200000 0x0 0x10000>,
> <0x0 0x20140520 0x0 0x4>;
> reg-names = "ahci", "sata-ecc";
> - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> dma-coherent;
> @@ -519,7 +519,7 @@ sata: sata at 3200000 {
> usb1: usb at 8600000 {
> compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
> reg = <0x0 0x8600000 0x0 0x1000>;
> - interrupts = <0 139 0x4>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> phy_type = "ulpi";
> };
> @@ -528,7 +528,7 @@ msi: msi-controller1 at 1572000 {
> compatible = "fsl,ls1012a-msi";
> reg = <0x0 0x1572000 0x0 0x8>;
> msi-controller;
> - interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pcie1: pcie at 3400000 {
> @@ -536,8 +536,8 @@ pcie1: pcie at 3400000 {
> reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
> <0x40 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 118 0x4>, /* controller interrupt */
> - <0 117 0x4>; /* PME interrupt */
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> /* controller interrupt */
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> /* PME interrupt */
> interrupt-names = "aer", "pme";
> #address-cells = <3>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 70b8731029c4..18aa02a0ebff 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -859,8 +859,8 @@ QORIQ_CLK_PLL_DIV(16)>,
> malidp0: display at f080000 {
> compatible = "arm,mali-dp500";
> reg = <0x0 0xf080000 0x0 0x10000>;
> - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> - <0 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "DE", "SE";
> clocks = <&dpclk>,
> <&clockgen QORIQ_CLK_HWACCEL 2>,
> @@ -1024,7 +1024,7 @@ dpclk: clock-controller at f1f0000 {
> tmu: tmu at 1f80000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> - interrupts = <0 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0xa0026 0x80048
> 0x70061>;
> fsl,tmu-calibration =
> <0x00000000 0x00000024>,
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 8ee6d8c0ef61..1f5ae061e7e3 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -268,19 +268,19 @@ sec-crit {
>
> timer {
> compatible = "arm,armv8-timer";
> - interrupts = <1 13 0xf08>, /* Physical Secure PPI */
> - <1 14 0xf08>, /* Physical Non-Secure PPI */
> - <1 11 0xf08>, /* Virtual PPI */
> - <1 10 0xf08>; /* Hypervisor PPI */
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>;
> fsl,erratum-a008585;
> };
>
> pmu {
> compatible = "arm,cortex-a53-pmu";
> - interrupts = <0 106 0x4>,
> - <0 107 0x4>,
> - <0 95 0x4>,
> - <0 97 0x4>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-affinity = <&cpu0>,
> <&cpu1>,
> <&cpu2>,
> @@ -295,7 +295,7 @@ gic: interrupt-controller at 1400000 {
> <0x0 0x1402000 0 0x2000>, /* GICC */
> <0x0 0x1404000 0 0x2000>, /* GICH */
> <0x0 0x1406000 0 0x2000>; /* GICV */
> - interrupts = <1 9 0xf08>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
> +IRQ_TYPE_LEVEL_LOW)>;
> };
>
> soc: soc {
> @@ -352,7 +352,7 @@ crypto: crypto at 1700000 {
> #size-cells = <1>;
> ranges = <0x0 0x00 0x1700000 0x100000>;
> reg = <0x00 0x1700000 0x0 0x100000>;
> - interrupts = <0 75 0x4>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> dma-coherent;
>
> sec_jr0: jr at 10000 {
> @@ -360,7 +360,7 @@ sec_jr0: jr at 10000 {
> "fsl,sec-v5.0-job-ring",
> "fsl,sec-v4.0-job-ring";
> reg = <0x10000 0x10000>;
> - interrupts = <0 71 0x4>;
> + interrupts = <GIC_SPI 71
> IRQ_TYPE_LEVEL_HIGH>;
> };
>
> sec_jr1: jr at 20000 {
> @@ -368,7 +368,7 @@ sec_jr1: jr at 20000 {
> "fsl,sec-v5.0-job-ring",
> "fsl,sec-v4.0-job-ring";
> reg = <0x20000 0x10000>;
> - interrupts = <0 72 0x4>;
> + interrupts = <GIC_SPI 72
> IRQ_TYPE_LEVEL_HIGH>;
> };
>
> sec_jr2: jr at 30000 {
> @@ -376,7 +376,7 @@ sec_jr2: jr at 30000 {
> "fsl,sec-v5.0-job-ring",
> "fsl,sec-v4.0-job-ring";
> reg = <0x30000 0x10000>;
> - interrupts = <0 73 0x4>;
> + interrupts = <GIC_SPI 73
> IRQ_TYPE_LEVEL_HIGH>;
> };
>
> sec_jr3: jr at 40000 {
> @@ -384,7 +384,7 @@ sec_jr3: jr at 40000 {
> "fsl,sec-v5.0-job-ring",
> "fsl,sec-v4.0-job-ring";
> reg = <0x40000 0x10000>;
> - interrupts = <0 74 0x4>;
> + interrupts = <GIC_SPI 74
> IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
> @@ -405,7 +405,7 @@ dcfg: dcfg at 1ee0000 {
> ifc: memory-controller at 1530000 {
> compatible = "fsl,ifc";
> reg = <0x0 0x1530000 0x0 0x10000>;
> - interrupts = <0 43 0x4>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> qspi: spi at 1550000 {
> @@ -415,7 +415,7 @@ qspi: spi at 1550000 {
> reg = <0x0 0x1550000 0x0 0x10000>,
> <0x0 0x40000000 0x0 0x4000000>;
> reg-names = "QuadSPI", "QuadSPI-memory";
> - interrupts = <0 99 0x4>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "qspi_en", "qspi";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>,
> @@ -427,7 +427,7 @@ QORIQ_CLK_PLL_DIV(1)>,
> esdhc: esdhc at 1560000 {
> compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
> reg = <0x0 0x1560000 0x0 0x10000>;
> - interrupts = <0 62 0x4>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> clock-frequency = <0>;
> voltage-ranges = <1800 1800 3300 3300>;
> sdhci,auto-cmd12;
> @@ -438,14 +438,14 @@ esdhc: esdhc at 1560000 {
> ddr: memory-controller at 1080000 {
> compatible = "fsl,qoriq-memory-controller";
> reg = <0x0 0x1080000 0x0 0x1000>;
> - interrupts = <0 144 0x4>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> big-endian;
> };
>
> tmu: tmu at 1f00000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f00000 0x0 0x10000>;
> - interrupts = <0 33 0x4>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
> fsl,tmu-calibration =
> <0x00000000 0x00000023>,
> @@ -518,7 +518,7 @@ dspi0: spi at 2100000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2100000 0x0 0x10000>;
> - interrupts = <0 64 0x4>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "dspi";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -532,7 +532,7 @@ i2c0: i2c at 2180000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2180000 0x0 0x10000>;
> - interrupts = <0 56 0x4>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -547,7 +547,7 @@ i2c1: i2c at 2190000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2190000 0x0 0x10000>;
> - interrupts = <0 57 0x4>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -560,7 +560,7 @@ i2c2: i2c at 21a0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21a0000 0x0 0x10000>;
> - interrupts = <0 58 0x4>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -573,7 +573,7 @@ i2c3: i2c at 21b0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21b0000 0x0 0x10000>;
> - interrupts = <0 59 0x4>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> @@ -584,7 +584,7 @@ i2c3: i2c at 21b0000 {
> duart0: serial at 21c0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0500 0x0 0x100>;
> - interrupts = <0 54 0x4>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> };
> @@ -592,7 +592,7 @@ duart0: serial at 21c0500 {
> duart1: serial at 21c0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0600 0x0 0x100>;
> - interrupts = <0 54 0x4>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> };
> @@ -600,7 +600,7 @@ duart1: serial at 21c0600 {
> duart2: serial at 21d0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0500 0x0 0x100>;
> - interrupts = <0 55 0x4>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> };
> @@ -608,7 +608,7 @@ duart2: serial at 21d0500 {
> duart3: serial at 21d0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0600 0x0 0x100>;
> - interrupts = <0 55 0x4>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> };
> @@ -616,7 +616,7 @@ duart3: serial at 21d0600 {
> gpio1: gpio at 2300000 {
> compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2300000 0x0 0x10000>;
> - interrupts = <0 66 0x4>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -626,7 +626,7 @@ gpio1: gpio at 2300000 {
> gpio2: gpio at 2310000 {
> compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2310000 0x0 0x10000>;
> - interrupts = <0 67 0x4>;
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -636,7 +636,7 @@ gpio2: gpio at 2310000 {
> gpio3: gpio at 2320000 {
> compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2320000 0x0 0x10000>;
> - interrupts = <0 68 0x4>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -646,7 +646,7 @@ gpio3: gpio at 2320000 {
> gpio4: gpio at 2330000 {
> compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2330000 0x0 0x10000>;
> - interrupts = <0 134 0x4>;
> + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -721,7 +721,7 @@ data-only at 0 {
> lpuart0: serial at 2950000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x2950000 0x0 0x1000>;
> - interrupts = <0 48 0x4>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
> clock-names = "ipg";
> status = "disabled";
> @@ -730,7 +730,7 @@ lpuart0: serial at 2950000 {
> lpuart1: serial at 2960000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x2960000 0x0 0x1000>;
> - interrupts = <0 49 0x4>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "ipg";
> @@ -740,7 +740,7 @@ lpuart1: serial at 2960000 {
> lpuart2: serial at 2970000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x2970000 0x0 0x1000>;
> - interrupts = <0 50 0x4>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "ipg";
> @@ -750,7 +750,7 @@ lpuart2: serial at 2970000 {
> lpuart3: serial at 2980000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x2980000 0x0 0x1000>;
> - interrupts = <0 51 0x4>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "ipg";
> @@ -760,7 +760,7 @@ lpuart3: serial at 2980000 {
> lpuart4: serial at 2990000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x2990000 0x0 0x1000>;
> - interrupts = <0 52 0x4>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "ipg";
> @@ -770,7 +770,7 @@ lpuart4: serial at 2990000 {
> lpuart5: serial at 29a0000 {
> compatible = "fsl,ls1021a-lpuart";
> reg = <0x0 0x29a0000 0x0 0x1000>;
> - interrupts = <0 53 0x4>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "ipg";
> @@ -780,7 +780,7 @@ lpuart5: serial at 29a0000 {
> wdog0: watchdog at 2ad0000 {
> compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
> reg = <0x0 0x2ad0000 0x0 0x10000>;
> - interrupts = <0 83 0x4>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> clock-names = "wdog";
> @@ -793,8 +793,8 @@ edma0: dma-controller at 2c00000 {
> reg = <0x0 0x2c00000 0x0 0x10000>,
> <0x0 0x2c10000 0x0 0x10000>,
> <0x0 0x2c20000 0x0 0x10000>;
> - interrupts = <0 103 0x4>,
> - <0 103 0x4>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "edma-tx", "edma-err";
> dma-channels = <32>;
> big-endian;
> @@ -815,7 +815,7 @@ aux_bus: aux_bus {
> usb0: usb at 2f00000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x2f00000 0x0 0x10000>;
> - interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 60
> IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment =
> <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -827,7 +827,7 @@ usb0: usb at 2f00000 {
> usb1: usb at 3000000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3000000 0x0 0x10000>;
> - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 61
> IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment =
> <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -839,7 +839,7 @@ usb1: usb at 3000000 {
> usb2: usb at 3100000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3100000 0x0 0x10000>;
> - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 63
> IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment =
> <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -853,7 +853,7 @@ sata: sata at 3200000 {
> reg = <0x0 0x3200000 0x0 0x10000>,
> <0x0 0x20140520 0x0 0x4>;
> reg-names = "ahci", "sata-ecc";
> - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 69
> IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen
> QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> dma-coherent;
> @@ -864,21 +864,21 @@ msi1: msi-controller1 at 1571000 {
> compatible = "fsl,ls1043a-msi";
> reg = <0x0 0x1571000 0x0 0x8>;
> msi-controller;
> - interrupts = <0 116 0x4>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> msi2: msi-controller2 at 1572000 {
> compatible = "fsl,ls1043a-msi";
> reg = <0x0 0x1572000 0x0 0x8>;
> msi-controller;
> - interrupts = <0 126 0x4>;
> + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> msi3: msi-controller3 at 1573000 {
> compatible = "fsl,ls1043a-msi";
> reg = <0x0 0x1573000 0x0 0x8>;
> msi-controller;
> - interrupts = <0 160 0x4>;
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pcie1: pcie at 3400000 {
> @@ -886,8 +886,8 @@ pcie1: pcie at 3400000 {
> reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
> <0x40 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
> - <0 118 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -913,8 +913,8 @@ pcie2: pcie at 3500000 {
> reg = <0x00 0x03500000 0x0 0x00100000>, /*
> controller registers */
> <0x48 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
> - <0 128 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -940,8 +940,8 @@ pcie3: pcie at 3600000 {
> reg = <0x00 0x03600000 0x0 0x00100000>, /*
> controller registers */
> <0x50 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
> - <0 162 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 754a64be739c..e5fcfc690ffc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -441,7 +441,7 @@ clockgen: clocking at 1ee1000 {
> tmu: tmu at 1f00000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f00000 0x0 0x10000>;
> - interrupts = <0 33 0x4>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
> fsl,tmu-calibration =
> /* Calibration data group 1 */
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 604bf88d70b3..91589b907ec8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -118,7 +118,7 @@ gic: interrupt-controller at 6000000 {
> <0x0 0x0c0c0000 0 0x2000>, /* GICC */
> <0x0 0x0c0d0000 0 0x1000>, /* GICH */
> <0x0 0x0c0e0000 0 0x20000>; /* GICV */
> - interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -183,10 +183,10 @@ soc-crit {
>
> timer {
> compatible = "arm,armv8-timer";
> - interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure
> PPI */
> - <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-
> Secure PPI */
> - <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
> - <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI
> */
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Secure PPI */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical
> Non-Secure PPI */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual
> PPI */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/*
> Hypervisor PPI */
> };
>
> pmu {
> @@ -280,7 +280,7 @@ sfp: efuse at 1e80000 {
> tmu: tmu at 1f80000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> - interrupts = <0 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x70062>;
> fsl,tmu-calibration =
> /* Calibration data group 1 */
> @@ -347,7 +347,7 @@ duart0: serial at 21c0500 {
> reg = <0x0 0x21c0500 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> @@ -356,14 +356,14 @@ duart1: serial at 21c0600 {
> reg = <0x0 0x21c0600 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> gpio0: gpio at 2300000 {
> compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2300000 0x0 0x10000>;
> - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> gpio-controller;
> #gpio-cells = <2>;
> @@ -374,7 +374,7 @@ gpio0: gpio at 2300000 {
> gpio1: gpio at 2310000 {
> compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2310000 0x0 0x10000>;
> - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> gpio-controller;
> #gpio-cells = <2>;
> @@ -385,7 +385,7 @@ gpio1: gpio at 2310000 {
> gpio2: gpio at 2320000 {
> compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2320000 0x0 0x10000>;
> - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> gpio-controller;
> #gpio-cells = <2>;
> @@ -396,7 +396,7 @@ gpio2: gpio at 2320000 {
> gpio3: gpio at 2330000 {
> compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2330000 0x0 0x10000>;
> - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> gpio-controller;
> #gpio-cells = <2>;
> @@ -407,7 +407,7 @@ gpio3: gpio at 2330000 {
> ifc: memory-controller at 2240000 {
> compatible = "fsl,ifc";
> reg = <0x0 0x2240000 0x0 0x20000>;
> - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> #address-cells = <2>;
> #size-cells = <1>;
> @@ -419,7 +419,7 @@ i2c0: i2c at 2000000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2000000 0x0 0x10000>;
> - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(8)>;
> status = "disabled";
> @@ -430,7 +430,7 @@ i2c1: i2c at 2010000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2010000 0x0 0x10000>;
> - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(8)>;
> status = "disabled";
> @@ -441,7 +441,7 @@ i2c2: i2c at 2020000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2020000 0x0 0x10000>;
> - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(8)>;
> status = "disabled";
> @@ -452,7 +452,7 @@ i2c3: i2c at 2030000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2030000 0x0 0x10000>;
> - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(8)>;
> status = "disabled";
> @@ -477,7 +477,7 @@ QORIQ_CLK_PLL_DIV(4)>,
> esdhc: esdhc at 2140000 {
> compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
> reg = <0x0 0x2140000 0x0 0x10000>;
> - interrupts = <0 28 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> clock-frequency = <0>;
> clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
> voltage-ranges = <1800 1800 3300 3300>; @@ -
> 490,7 +490,7 @@ esdhc: esdhc at 2140000 {
> usb0: usb at 3100000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3100000 0x0 0x10000>;
> - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -501,7 +501,7 @@ usb0: usb at 3100000 {
> usb1: usb at 3110000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3110000 0x0 0x10000>;
> - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment = <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -514,7 +514,7 @@ sata: sata at 3200000 {
> reg = <0x0 0x3200000 0x0 0x10000>,
> <0x7 0x100520 0x0 0x4>;
> reg-names = "ahci", "sata-ecc";
> - interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> dma-coherent;
> @@ -565,7 +565,7 @@ pcie1: pcie at 3400000 {
> reg = <0x00 0x03400000 0x0 0x00100000>, /*
> controller registers */
> <0x20 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
> interrupt-names = "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -604,7 +604,7 @@ pcie2: pcie at 3500000 {
> reg = <0x00 0x03500000 0x0 0x00100000>, /*
> controller registers */
> <0x28 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
> interrupt-names = "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -642,7 +642,7 @@ pcie3: pcie at 3600000 {
> reg = <0x00 0x03600000 0x0 0x00100000>, /*
> controller registers */
> <0x30 0x00000000 0x0 0x00002000>; /*
> configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer
> interrupt */
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> /* aer interrupt */
> interrupt-names = "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index 8352197cea6f..e9bc1f4fa13c 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -15,7 +15,7 @@
> / {
> pmu {
> compatible = "arm,cortex-a57-pmu";
> - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> index 245bbd615c81..60c422560e33 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> @@ -15,7 +15,7 @@
> / {
> pmu {
> compatible = "arm,cortex-a72-pmu";
> - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index ccba0a135b24..cc305e629bdc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -58,7 +58,7 @@ gic: interrupt-controller at 6000000 {
> #size-cells = <2>;
> ranges;
> interrupt-controller;
> - interrupts = <1 9 0x4>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>
> its: msi-controller at 6020000 {
> compatible = "arm,gic-v3-its";
> @@ -314,7 +314,7 @@ extirq: interrupt-controller at 14 {
> tmu: tmu at 1f80000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> - interrupts = <0 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> fsl,tmu-range = <0xb0000 0x9002a 0x6004c
> 0x30062>;
> fsl,tmu-calibration =
> <0x00000000 0x00000026>,
> @@ -362,7 +362,7 @@ serial0: serial at 21c0500 {
> reg = <0x0 0x21c0500 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 32 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial1: serial at 21c0600 {
> @@ -370,7 +370,7 @@ serial1: serial at 21c0600 {
> reg = <0x0 0x21c0600 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 32 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial2: serial at 21d0500 {
> @@ -378,7 +378,7 @@ serial2: serial at 21d0500 {
> reg = <0x0 0x21d0500 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 33 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial3: serial at 21d0600 {
> @@ -386,7 +386,7 @@ serial3: serial at 21d0600 {
> reg = <0x0 0x21d0600 0x0 0x100>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> - interrupts = <0 33 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> cluster1_core0_watchdog: wdt at c000000 { @@ -883,48
> +883,48 @@ smmu: iommu at 5000000 {
> #iommu-cells = <1>;
> stream-match-mask = <0x7C00>;
> dma-coherent;
> - interrupts = <0 13 4>, /* global secure fault */
> - <0 14 4>, /* combined secure interrupt
> */
> - <0 15 4>, /* global non-secure fault */
> - <0 16 4>, /* combined non-secure
> interrupt */
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /*
> global secure fault */
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /*
> combined secure interrupt */
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /*
> global non-secure fault */
> + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /*
> combined non-secure
> +interrupt */
> /* performance counter interrupts 0-7 */
> - <0 211 4>, <0 212 4>,
> - <0 213 4>, <0 214 4>,
> - <0 215 4>, <0 216 4>,
> - <0 217 4>, <0 218 4>,
> + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 218
> +IRQ_TYPE_LEVEL_HIGH>,
> /* per context interrupt, 64 interrupts */
> - <0 146 4>, <0 147 4>,
> - <0 148 4>, <0 149 4>,
> - <0 150 4>, <0 151 4>,
> - <0 152 4>, <0 153 4>,
> - <0 154 4>, <0 155 4>,
> - <0 156 4>, <0 157 4>,
> - <0 158 4>, <0 159 4>,
> - <0 160 4>, <0 161 4>,
> - <0 162 4>, <0 163 4>,
> - <0 164 4>, <0 165 4>,
> - <0 166 4>, <0 167 4>,
> - <0 168 4>, <0 169 4>,
> - <0 170 4>, <0 171 4>,
> - <0 172 4>, <0 173 4>,
> - <0 174 4>, <0 175 4>,
> - <0 176 4>, <0 177 4>,
> - <0 178 4>, <0 179 4>,
> - <0 180 4>, <0 181 4>,
> - <0 182 4>, <0 183 4>,
> - <0 184 4>, <0 185 4>,
> - <0 186 4>, <0 187 4>,
> - <0 188 4>, <0 189 4>,
> - <0 190 4>, <0 191 4>,
> - <0 192 4>, <0 193 4>,
> - <0 194 4>, <0 195 4>,
> - <0 196 4>, <0 197 4>,
> - <0 198 4>, <0 199 4>,
> - <0 200 4>, <0 201 4>,
> - <0 202 4>, <0 203 4>,
> - <0 204 4>, <0 205 4>,
> - <0 206 4>, <0 207 4>,
> - <0 208 4>, <0 209 4>;
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 209
> +IRQ_TYPE_LEVEL_HIGH>;
> };
>
> dspi: spi at 2100000 {
> @@ -933,7 +933,7 @@ dspi: spi at 2100000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2100000 0x0 0x10000>;
> - interrupts = <0 26 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> clock-names = "dspi";
> @@ -944,7 +944,7 @@ esdhc: esdhc at 2140000 {
> status = "disabled";
> compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
> reg = <0x0 0x2140000 0x0 0x10000>;
> - interrupts = <0 28 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> voltage-ranges = <1800 1800 3300 3300>; @@ -
> 956,7 +956,7 @@ esdhc: esdhc at 2140000 {
> gpio0: gpio at 2300000 {
> compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2300000 0x0 0x10000>;
> - interrupts = <0 36 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> little-endian;
> #gpio-cells = <2>;
> @@ -967,7 +967,7 @@ gpio0: gpio at 2300000 {
> gpio1: gpio at 2310000 {
> compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2310000 0x0 0x10000>;
> - interrupts = <0 36 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> little-endian;
> #gpio-cells = <2>;
> @@ -978,7 +978,7 @@ gpio1: gpio at 2310000 {
> gpio2: gpio at 2320000 {
> compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2320000 0x0 0x10000>;
> - interrupts = <0 37 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> little-endian;
> #gpio-cells = <2>;
> @@ -989,7 +989,7 @@ gpio2: gpio at 2320000 {
> gpio3: gpio at 2330000 {
> compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
> reg = <0x0 0x2330000 0x0 0x10000>;
> - interrupts = <0 37 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> gpio-controller;
> little-endian;
> #gpio-cells = <2>;
> @@ -1003,7 +1003,7 @@ i2c0: i2c at 2000000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2000000 0x0 0x10000>;
> - interrupts = <0 34 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> @@ -1015,7 +1015,7 @@ i2c1: i2c at 2010000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2010000 0x0 0x10000>;
> - interrupts = <0 34 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> @@ -1027,7 +1027,7 @@ i2c2: i2c at 2020000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2020000 0x0 0x10000>;
> - interrupts = <0 35 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> @@ -1039,7 +1039,7 @@ i2c3: i2c at 2030000 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2030000 0x0 0x10000>;
> - interrupts = <0 35 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "i2c";
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> @@ -1048,7 +1048,7 @@ i2c3: i2c at 2030000 {
> ifc: memory-controller at 2240000 {
> compatible = "fsl,ifc";
> reg = <0x0 0x2240000 0x0 0x20000>;
> - interrupts = <0 21 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> #address-cells = <2>;
> #size-cells = <1>;
> @@ -1077,7 +1077,7 @@ QORIQ_CLK_PLL_DIV(4)>,
> pcie1: pcie at 3400000 {
> compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
> reg-names = "regs", "config";
> - interrupts = <0 108 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "intr";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -1099,7 +1099,7 @@ pcie1: pcie at 3400000 {
> pcie2: pcie at 3500000 {
> compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
> reg-names = "regs", "config";
> - interrupts = <0 113 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "intr";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -1121,7 +1121,7 @@ pcie2: pcie at 3500000 {
> pcie3: pcie at 3600000 {
> compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
> reg-names = "regs", "config";
> - interrupts = <0 118 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "intr";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -1143,7 +1143,7 @@ pcie3: pcie at 3600000 {
> pcie4: pcie at 3700000 {
> compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
> reg-names = "regs", "config";
> - interrupts = <0 123 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "intr";
> #address-cells = <3>;
> #size-cells = <2>;
> @@ -1166,7 +1166,7 @@ sata0: sata at 3200000 {
> status = "disabled";
> compatible = "fsl,ls2080a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>;
> - interrupts = <0 133 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> dma-coherent;
> @@ -1176,7 +1176,7 @@ sata1: sata at 3210000 {
> status = "disabled";
> compatible = "fsl,ls2080a-ahci";
> reg = <0x0 0x3210000 0x0 0x10000>;
> - interrupts = <0 136 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(4)>;
> dma-coherent;
> @@ -1192,7 +1192,7 @@ bus: bus {
> usb0: usb at 3100000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3100000 0x0 0x10000>;
> - interrupts = <0 80 0x4>; /* Level high type
> */
> + interrupts = <GIC_SPI 80
> IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment =
> <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -1203,7 +1203,7 @@ usb0: usb at 3100000 {
> usb1: usb at 3110000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x3110000 0x0 0x10000>;
> - interrupts = <0 81 0x4>; /* Level high type
> */
> + interrupts = <GIC_SPI 81
> IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> snps,quirk-frame-length-adjustment =
> <0x20>;
> snps,dis_rxdet_inp3_quirk;
> @@ -1215,7 +1215,7 @@ usb1: usb at 3110000 {
> ccn at 4000000 {
> compatible = "arm,ccn-504";
> reg = <0x0 0x04000000 0x0 0x01000000>;
> - interrupts = <0 12 4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> rcpm: power-controller at 1e34040 {
> @@ -1236,14 +1236,14 @@ ftm_alarm0: timer at 2800000 {
> ddr1: memory-controller at 1080000 {
> compatible = "fsl,qoriq-memory-controller";
> reg = <0x0 0x1080000 0x0 0x1000>;
> - interrupts = <0 17 0x4>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> };
>
> ddr2: memory-controller at 1090000 {
> compatible = "fsl,qoriq-memory-controller";
> reg = <0x0 0x1090000 0x0 0x1000>;
> - interrupts = <0 18 0x4>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> little-endian;
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 96055593204a..eaa7d8c70964 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -928,7 +928,7 @@ dspi2: spi at 2120000 {
> esdhc0: esdhc at 2140000 {
> compatible = "fsl,esdhc";
> reg = <0x0 0x2140000 0x0 0x10000>;
> - interrupts = <0 28 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> dma-coherent;
> @@ -942,7 +942,7 @@ esdhc0: esdhc at 2140000 {
> esdhc1: esdhc at 2150000 {
> compatible = "fsl,esdhc";
> reg = <0x0 0x2150000 0x0 0x10000>;
> - interrupts = <0 63 0x4>; /* Level high type */
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> dma-coherent;
> --
> 2.43.0
>
More information about the linux-arm-kernel
mailing list