[PATCH 3/3] arm64: dts: imx8: use defines for interrupts

[Krzysztof Kozlowski]

Replace hard-coded interrupt flags with standard defines for
readability.  No changes in resulting DTBs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 90d1901df2b1..930e14fec423 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -400,7 +400,7 @@ ptn5110: tcpc at 50 {
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <11 8>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
 		typec1_con: connector {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index c024be33fbcc..6d002fc1b2be 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -193,7 +193,7 @@ light-sensor at 44 {
 		compatible = "isil,isl29023";
 		reg = <0x44>;
 		interrupt-parent = <&lsio_gpio4>;
-		interrupts = <11 2>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 	};
 
 	pressure-sensor at 60 {
-- 
2.43.0