[PATCH 2/2] ARM: dts: socfpga: Add support for Terasic DE1-SOC board

[Krzysztof Kozlowski]

On 05/06/2024 10:33, Florian Vaussard wrote:
> Compared to Terasic SoCKit, here are some of the notable differences
> on the HPS side:
> - Only 1 user LED and 1 user KEY
> - The QSPI Flash is not populated
> - The ADXL345 accelerometer is on I2C0 instead of I2C1
> 
> Tested to be working:
> - LED / KEY
> - Ethernet
> - Both USB Host ports
> - SD card
> - ADXL345 accelerometer
> 
> Signed-off-by: Florian Vaussard <florian.vaussard at gmail.com>
> ---
>  arch/arm/boot/dts/intel/socfpga/Makefile      |   1 +
>  .../socfpga/socfpga_cyclone5_de1_soc.dts      | 106 ++++++++++++++++++
>  2 files changed, 107 insertions(+)
>  create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts
> 
> diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
> index c467828aeb4b..1d5140b238da 100644
> --- a/arch/arm/boot/dts/intel/socfpga/Makefile
> +++ b/arch/arm/boot/dts/intel/socfpga/Makefile
> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
>  	socfpga_cyclone5_mcvevk.dtb \
>  	socfpga_cyclone5_socdk.dtb \
>  	socfpga_cyclone5_de0_nano_soc.dtb \
> +	socfpga_cyclone5_de1_soc.dtb \
>  	socfpga_cyclone5_sockit.dtb \
>  	socfpga_cyclone5_socrates.dtb \
>  	socfpga_cyclone5_sodia.dtb \
> diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts
> new file mode 100644
> index 000000000000..7d811be5f5a7
> --- /dev/null
> +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts
> @@ -0,0 +1,106 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2024 Florian Vaussard <florian.vaussard at gmail.com>
> + */
> +
> +#include "socfpga_cyclone5.dtsi"
> +
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Terasic DE1-SOC";
> +	compatible = "terasic,de1-soc", "altr,socfpga-cyclone5", "altr,socfpga";
> +
> +	chosen {
> +		bootargs = "earlyprintk";

That's debugging, not mainline. Drop bootargs.

> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory at 0 {
> +		name = "memory";

Which binding defines this property?

> +		device_type = "memory";
> +		reg = <0x0 0x40000000>; /* 1GB */
> +	};
> +
> +	aliases {
> +		/* this allow the ethaddr uboot environmnet variable contents

Please use Linux coding style comments /* in separate line. Also, typos.

> +		 * to be added to the gmac1 device tree blob.
> +		 */
> +		ethernet0 = &gmac1;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		hps_led {

No underscores in node names.

> +			label = "hps:green:led";

Drop. Use function and color instead.

> +			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		hps_key {

No underscores...

> +			label = "hps_key";
> +			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
> +			linux,code = <BTN_0>;
> +		};
> +	};
> +
> +	regulator_3_3v: regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC3P3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&gmac1 {
> +	status = "okay";
> +	phy-mode = "rgmii";
> +
> +	rxd0-skew-ps = <0>;
> +	rxd1-skew-ps = <0>;
> +	rxd2-skew-ps = <0>;
> +	rxd3-skew-ps = <0>;
> +	txen-skew-ps = <0>;
> +	txc-skew-ps = <2600>;
> +	rxdv-skew-ps = <0>;
> +	rxc-skew-ps = <2000>;
> +};
> +
> +&gpio0 {	/* GPIO 0..29 */
> +	status = "okay";
> +};
> +
> +&gpio1 {	/* GPIO 30..57 */
> +	status = "okay";
> +};
> +
> +&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	accel1: accelerometer at 53 {
> +		compatible = "adi,adxl345";
> +		reg = <0x53>;
> +
> +		interrupt-parent = <&portc>;
> +		interrupts = <3 2>;
> +	};
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&regulator_3_3v>;
> +	vqmmc-supply = <&regulator_3_3v>;

That's a noop... Isn't this coming from a PMIC?

Best regards,
Krzysztof