[PATCH net-next v12 11/13] net: ethtool: cable-test: Target the command to the requested PHY

[Maxime Chevallier]

Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
---
 net/ethtool/cabletest.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/ethtool/cabletest.c b/net/ethtool/cabletest.c
index f6f136ec7ddf..73dd4c439a3d 100644
--- a/net/ethtool/cabletest.c
+++ b/net/ethtool/cabletest.c
@@ -13,7 +13,7 @@
 
 const struct nla_policy ethnl_cable_test_act_policy[] = {
 	[ETHTOOL_A_CABLE_TEST_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static int ethnl_cable_test_started(struct phy_device *phydev, u8 cmd)
@@ -69,7 +69,7 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
 		return ret;
 
 	dev = req_info.dev;
-	if (!dev->phydev) {
+	if (!req_info.phydev) {
 		ret = -EOPNOTSUPP;
 		goto out_dev_put;
 	}
@@ -85,12 +85,12 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
 	if (ret < 0)
 		goto out_rtnl;
 
-	ret = ops->start_cable_test(dev->phydev, info->extack);
+	ret = ops->start_cable_test(req_info.phydev, info->extack);
 
 	ethnl_ops_complete(dev);
 
 	if (!ret)
-		ethnl_cable_test_started(dev->phydev,
+		ethnl_cable_test_started(req_info.phydev,
 					 ETHTOOL_MSG_CABLE_TEST_NTF);
 
 out_rtnl:
@@ -216,7 +216,7 @@ static const struct nla_policy cable_test_tdr_act_cfg_policy[] = {
 
 const struct nla_policy ethnl_cable_test_tdr_act_policy[] = {
 	[ETHTOOL_A_CABLE_TEST_TDR_HEADER]	=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_CABLE_TEST_TDR_CFG]		= { .type = NLA_NESTED },
 };
 
@@ -317,7 +317,7 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info)
 		return ret;
 
 	dev = req_info.dev;
-	if (!dev->phydev) {
+	if (!req_info.phydev) {
 		ret = -EOPNOTSUPP;
 		goto out_dev_put;
 	}
@@ -338,12 +338,12 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info)
 	if (ret < 0)
 		goto out_rtnl;
 
-	ret = ops->start_cable_test_tdr(dev->phydev, info->extack, &cfg);
+	ret = ops->start_cable_test_tdr(req_info.phydev, info->extack, &cfg);
 
 	ethnl_ops_complete(dev);
 
 	if (!ret)
-		ethnl_cable_test_started(dev->phydev,
+		ethnl_cable_test_started(req_info.phydev,
 					 ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
 
 out_rtnl:
-- 
2.45.1