[PATCH] arm64: dts: st: add power domain on stm32mp25

[Alexandre TORGUE]

Hello Patrick

On 4/25/24 17:45, Patrick Delaunay wrote:
> Add power domains on STM32MP25x SoC for supported low power modes:
> - CPU_PD0/1: domain for idle of each core Cortex A35 (CStop)
> - CLUSTER_PD: D1 domain with Stop1 and LP-Stop1 modes support when
>    the Cortex A35 cluster and each device assigned to CPU1=CA35
>    are deactivated
> - RET_PD: D1 domain retention (VDDCore is reduced) to support
>            the LPLV-Stop1 mode
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 

Applied on stm32-next.

Thanks!!
Alex


>   arch/arm64/boot/dts/st/stm32mp251.dtsi | 16 ++++++++++++++++
>   arch/arm64/boot/dts/st/stm32mp253.dtsi |  9 +++++++++
>   2 files changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> index af1444bf9442..4beb0a0bef4f 100644
> --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> @@ -18,6 +18,8 @@ cpu0: cpu at 0 {
>   			device_type = "cpu";
>   			reg = <0>;
>   			enable-method = "psci";
> +			power-domains = <&CPU_PD0>;
> +			power-domain-names = "psci";
>   		};
>   	};
>   
> @@ -104,6 +106,20 @@ intc: interrupt-controller at 4ac00000 {
>   	psci {
>   		compatible = "arm,psci-1.0";
>   		method = "smc";
> +
> +		CPU_PD0: power-domain-cpu0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +		};
> +
> +		CLUSTER_PD: power-domain-cluster {
> +			#power-domain-cells = <0>;
> +			power-domains = <&RET_PD>;
> +		};
> +
> +		RET_PD: power-domain-retention {
> +			#power-domain-cells = <0>;
> +		};
>   	};
>   
>   	timer {
> diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
> index af48e82efe8a..79c02ef2e51e 100644
> --- a/arch/arm64/boot/dts/st/stm32mp253.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
> @@ -12,6 +12,8 @@ cpu1: cpu at 1 {
>   			device_type = "cpu";
>   			reg = <1>;
>   			enable-method = "psci";
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
>   		};
>   	};
>   
> @@ -20,4 +22,11 @@ arm-pmu {
>   			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
>   		interrupt-affinity = <&cpu0>, <&cpu1>;
>   	};
> +
> +	psci {
> +		CPU_PD1: power-domain-cpu1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +		};
> +	};
>   };