[PATCH v4 00/11] Series to deliver Ethernet for STM32MP13

[Christophe ROULLIER]

On 6/4/24 17:29, Rob Herring (Arm) wrote:
> On Tue, 04 Jun 2024 16:34:51 +0200, Christophe Roullier wrote:
>> STM32MP13 is STM32 SOC with 2 GMACs instances
>>      GMAC IP version is SNPS 4.20.
>>      GMAC IP configure with 1 RX and 1 TX queue.
>>      DMA HW capability register supported
>>      RX Checksum Offload Engine supported
>>      TX Checksum insertion supported
>>      Wake-Up On Lan supported
>>      TSO supported
>> Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)
>>
>> V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
>>        Remark from Serge Semin (upate commits msg)
>> V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
>>        manage PHY regulator (in glue or PHY side)
>>      - Integrate RFC from Marek
>>      - Remark from Rob Herring in YAML documentation
>> V4: - Remark from Marek (remove max-speed, extra space in DT, update commit msg)
>>      - Remark from Rasmus (add sign-off, add base-commit)
>>      - Remark from Sai Krishna Gajula
>>
>> Christophe Roullier (6):
>>    dt-bindings: net: add STM32MP13 compatible in documentation for stm32
>>    net: ethernet: stmmac: add management of stm32mp13 for stm32
>>    ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
>>    ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
>>    ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
>>    ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support
>>
>> Marek Vasut (5):
>>    net: stmmac: dwmac-stm32: Separate out external clock rate validation
>>    net: stmmac: dwmac-stm32: Separate out external clock selector
>>    net: stmmac: dwmac-stm32: Extract PMCR configuration
>>    net: stmmac: dwmac-stm32: Clean up the debug prints
>>    net: stmmac: dwmac-stm32: Fix Mhz to MHz
>>
>>   .../devicetree/bindings/net/stm32-dwmac.yaml  |  41 ++++-
>>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi   |  71 ++++++++
>>   arch/arm/boot/dts/st/stm32mp131.dtsi          |  38 ++++
>>   arch/arm/boot/dts/st/stm32mp133.dtsi          |  31 ++++
>>   arch/arm/boot/dts/st/stm32mp135f-dk.dts       |  23 +++
>>   arch/arm/configs/multi_v7_defconfig           |   1 +
>>   .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 172 ++++++++++++++----
>>   7 files changed, 330 insertions(+), 47 deletions(-)
>>
>>
>> base-commit: cd0057ad75116bacf16fea82e48c1db642971136
>> --
>> 2.25.1
>>
>>
>>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
>    pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y st/stm32mp135f-dk.dtb' for 20240604143502.154463-1-christophe.roullier at foss.st.com:
>
> arch/arm/boot/dts/st/stm32mp135f-dk.dtb: adc at 48003000: 'ethernet at 5800e000' does not match any of the regexes: '^adc@[0-9]+$', 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
>
Hi Rob,

I will provide v5 to fix it.

Thanks

>
>
>