[PATCH] arm64: zynqmp: Add coresight cpu debug support

[Michal Simek]

On 5/3/24 17:34, Sean Anderson wrote:
> Add coresight debug support to the device tree. This can be useful when
> panicking, especially when a core is hung in EL3.
> 
> Signed-off-by: Sean Anderson <sean.anderson at linux.dev>
> ---
> 
>   .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 16 +++++++++++
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 28 +++++++++++++++++++
>   2 files changed, 44 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> index dd4569e7bd95..60d1b1acf9a0 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> @@ -70,6 +70,22 @@ &cpu0 {
>   	clocks = <&zynqmp_clk ACPU>;
>   };
>   
> +&cpu0_debug {
> +	clocks = <&zynqmp_clk DBF_FPD>;
> +};
> +
> +&cpu1_debug {
> +	clocks = <&zynqmp_clk DBF_FPD>;
> +};
> +
> +&cpu2_debug {
> +	clocks = <&zynqmp_clk DBF_FPD>;
> +};
> +
> +&cpu3_debug {
> +	clocks = <&zynqmp_clk DBF_FPD>;
> +};
> +
>   &fpd_dma_chan1 {
>   	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
>   };
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 25d20d803230..ec8d5d19ac1c 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -330,6 +330,34 @@ pmu at 9000 {
>   			};
>   		};
>   
> +		cpu0_debug: debug at fec10000 {
> +			compatible = "arm,coresight-cpu-debug", "arm,primecell";
> +			reg = <0x0 0xfec10000 0x0 0x1000>;
> +			clock-names = "apb_pclk";
> +			cpu = <&cpu0>;
> +		};
> +
> +		cpu1_debug: debug at fed10000 {
> +			compatible = "arm,coresight-cpu-debug", "arm,primecell";
> +			reg = <0x0 0xfed10000 0x0 0x1000>;
> +			clock-names = "apb_pclk";
> +			cpu = <&cpu1>;
> +		};
> +
> +		cpu2_debug: debug at fee10000 {
> +			compatible = "arm,coresight-cpu-debug", "arm,primecell";
> +			reg = <0x0 0xfee10000 0x0 0x1000>;
> +			clock-names = "apb_pclk";
> +			cpu = <&cpu2>;
> +		};
> +
> +		cpu3_debug: debug at fef10000 {
> +			compatible = "arm,coresight-cpu-debug", "arm,primecell";
> +			reg = <0x0 0xfef10000 0x0 0x1000>;
> +			clock-names = "apb_pclk";
> +			cpu = <&cpu3>;
> +		};
> +
>   		/* GDMA */
>   		fpd_dma_chan1: dma-controller at fd500000 {
>   			status = "disabled";

Applied.
M