[PATCH 2/3] perf: arm_pmu: Only show online CPUs in device's "cpus" attribute

[Yicong Yang]

Hi Ian,

On 2024/6/4 0:20, Ian Rogers wrote:
> On Mon, Jun 3, 2024 at 2:33 AM Yicong Yang <yangyicong at huawei.com> wrote:
>>
>> From: Yicong Yang <yangyicong at hisilicon.com>
>>
>> When there're CPUs offline after system booting, perf will failed:
>> [root at localhost ~]# /home/yang/perf stat -a -e armv8_pmuv3_0/cycles/
>> Error:
>> The sys_perf_event_open() syscall returned with 19 (No such device) for event (cpu-clock).
>> /bin/dmesg | grep -i perf may provide additional information.
> 
> Thanks for debugging this Yicong! The fact cycles is falling back on
> cpu-clock I'm confused by, on ARM the PMU type generally isn't
> PERF_TYPE_HARDWARE and so this fallback shouldn't happen:
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n2900
> I note your command line is for system wide event opening rather than
> for a process. It is more strange the fallback is giving "No such
> device".
> 
>> This is due to PMU's "cpus" is not updated and still contains offline
>> CPUs and perf will try to open perf event on the offlined CPUs.
> 
> The perf tool will try to only open online CPUs. Unfortunately the
> naming around this is confusing:
> 
> - any - an event may follow a task and schedule on "any" CPU. We
> encode this with -1.
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n24
> - online - the set of online CPU.
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n33
> - all - I try to avoid this but it may still be in the code, "all"
> usually is another name for online. Hopefully when we use this name it
> is clearly defined:
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/internal/evlist.h?h=perf-tools-next#n23
> 
>> Make "cpus" attribute only shows online CPUs and introduced a new
>> "supported_cpus" where users can get the range of the CPUs this
>> PMU supported monitoring.
> 
> I don't think this should be necessary as by default the CPUs the perf
> tool will use will be the "online" CPUs:
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/evlist.c?h=perf-tools-next#n40
> 
> Could you create a reproduction of the problem you are encountering?
> My expectation is for a core PMU to advertise the online and offline
> CPUs it is valid for, and for perf to intersect:
> https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n44
> those CPUs with the online CPUs so the perf_event_open doesn't fail.
> 

Thanks for the comments and detailed illustration!

Actually it can be reproduced easily using the armv8_pmuv3's events. Tested on 6.10-rc1 with
perf version 6.10.rc1.g1613e604df0c:
# offline any CPU
[root at localhost tmp]# echo 0 > /sys//devices/system/cpu/cpu1/online
# try any event of armv8_pmuv3, with -a or without
[root at localhost tmp]# ./perf stat -e armv8_pmuv3_0/ll_cache/ -vvv
Control descriptor is not initialized
Opening: armv8_pmuv3_0/ll_cache/
------------------------------------------------------------
perf_event_attr:
  type                             10 (armv8_pmuv3_0)
  size                             136
  config                           0x32 (ll_cache)
  sample_type                      IDENTIFIER
  read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
  disabled                         1
  inherit                          1
  exclude_guest                    1
------------------------------------------------------------
sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 3
Opening: armv8_pmuv3_0/ll_cache/
------------------------------------------------------------
perf_event_attr:
  type                             10 (armv8_pmuv3_0)
  size                             136
  config                           0x32 (ll_cache)
  sample_type                      IDENTIFIER
  read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
  disabled                         1
  inherit                          1
  exclude_guest                    1
------------------------------------------------------------
sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -19
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (armv8_pmuv3_0/ll_cache/).
/bin/dmesg | grep -i perf may provide additional information.

As you can see, we're trying to open event on CPU 0 first (succeed) and then CPU 1 but
failed on CPU1. Actually we don't enter any branch which handle the evsel->cpus in
__perf_evlist__propagate_maps() so the evsel->cpus keeps as is which should be initialized
from the pmu->cpumask. You referenced to [1] but in this case perf_evsel->system_wide == false
as I checked. perf_evsel->system_wide will set to true in perf_evlist__go_system_wide() and it
maybe only set for dummy events. Please correct me if I misread here.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/evlist.c?h=perf-tools-next#n40

Thanks.