[PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

[Sneh Shah]

On 5/30/2024 1:39 AM, Russell King (Oracle) wrote:
> On Wed, May 29, 2024 at 07:43:15PM +0530, Sneh Shah wrote:
>> In this version of qualcomm ethernet, PCS is not an independent HW
>> block. It is integrated to MAC block itself. It has very limited
>> configuration.Here PCS doesn't have it's own link speed/duplex
>> capabities. Hence we are bypassing all this PCS related functionalities.
> 
> I want to concentrate on this part first - we'll address the 2.5G
> issues separately once I've got a picture of this hardware (and thus
> can work out what needs to change in my phylink_pcs implementation to
> support the standard Cisco SGMII speeds.
> 
> From what I understand you're saying, your integrated PCS is different
> from the DesignWare integrated PCS?
It's an inbuilt PCS block within designware ETHQoS core.
> 
> Which core does it use? dwmac4_core.c or dwmac1000_core.c, or some
> other? Not knowing which core makes asking the following questions
> harder, since I'm having to double them up to cover both cores with
> their different definitions.

it is dwmac4 core with 0xe0 offset.
> 
> Does it only present its status via the GMAC_PHYIF_CONTROL_STATUS or
> GMAC_RGSMIIIS register?

It is present via GMAC_PHYIF_CONTROL_STATUS.
> 
> From what you're saying:
> - if using the dwmac1000 core, then for the registers at GMAC_PCS_BASE
>   (0xc0 offset)...
> - if using the dwmac4 core, then for registers at GMAC_PCS_BASE
>   (0xe0 offset)...
> ... is it true that only the GMAC_AN_CTRL() register is implemented
> and none of the other registers listed in stmmac_pcs.h?
> 
> In terms of interrupts when the link status changes, how do they
> present? Are they through the GMAC_INT_RGSMIIS interrupt only?
> What about GMAC_INT_PCS_LINK or GMAC_INT_PCS_ANE? Or in the case
> of the other core, is it through the PCS_RGSMIIIS_IRQ interrupt
> only? Similarly, what about PCS_LINK_IRQ or PCS_ANE_IRQ?

we only have GMAC_AN_CTRL and GMAC_AN_STATUS register.
There is no separate IRQ line for PCS link or autoneg. 
It is notified via MAC interrupt line only.
> 
> Thanks.
>