[PATCH v4 5/9] media: platform: ti: use for_each_endpoint_of_node()
Kuninori Morimoto
kuninori.morimoto.gx at renesas.com
Sun Jun 2 18:18:27 PDT 2024
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
drivers/media/platform/ti/am437x/am437x-vpfe.c | 12 +++++-------
drivers/media/platform/ti/davinci/vpif_capture.c | 14 +++++++-------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/ti/am437x/am437x-vpfe.c b/drivers/media/platform/ti/am437x/am437x-vpfe.c
index 77e12457d1495..009ff68a2b43c 100644
--- a/drivers/media/platform/ti/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/ti/am437x/am437x-vpfe.c
@@ -2287,7 +2287,7 @@ static const struct v4l2_async_notifier_operations vpfe_async_ops = {
static struct vpfe_config *
vpfe_get_pdata(struct vpfe_device *vpfe)
{
- struct device_node *endpoint = NULL;
+ struct device_node *endpoint;
struct device *dev = vpfe->pdev;
struct vpfe_subdev_info *sdinfo;
struct vpfe_config *pdata;
@@ -2306,14 +2306,11 @@ vpfe_get_pdata(struct vpfe_device *vpfe)
if (!pdata)
return NULL;
- for (i = 0; ; i++) {
+ i = 0;
+ for_each_endpoint_of_node(dev->of_node, endpoint) {
struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
struct device_node *rem;
- endpoint = of_graph_get_next_endpoint(dev->of_node, endpoint);
- if (!endpoint)
- break;
-
sdinfo = &pdata->sub_devs[i];
sdinfo->grp_id = 0;
@@ -2371,9 +2368,10 @@ vpfe_get_pdata(struct vpfe_device *vpfe)
of_node_put(rem);
if (IS_ERR(pdata->asd[i]))
goto cleanup;
+
+ i++;
}
- of_node_put(endpoint);
return pdata;
cleanup:
diff --git a/drivers/media/platform/ti/davinci/vpif_capture.c b/drivers/media/platform/ti/davinci/vpif_capture.c
index c28794b6677b7..16326437767f8 100644
--- a/drivers/media/platform/ti/davinci/vpif_capture.c
+++ b/drivers/media/platform/ti/davinci/vpif_capture.c
@@ -1487,7 +1487,7 @@ static struct vpif_capture_config *
vpif_capture_get_pdata(struct platform_device *pdev,
struct v4l2_device *v4l2_dev)
{
- struct device_node *endpoint = NULL;
+ struct device_node *endpoint;
struct device_node *rem = NULL;
struct vpif_capture_config *pdata;
struct vpif_subdev_info *sdinfo;
@@ -1517,16 +1517,12 @@ vpif_capture_get_pdata(struct platform_device *pdev,
if (!pdata->subdev_info)
return NULL;
- for (i = 0; i < VPIF_CAPTURE_NUM_CHANNELS; i++) {
+ i = 0;
+ for_each_endpoint_of_node(pdev->dev.of_node, endpoint) {
struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
unsigned int flags;
int err;
- endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
- endpoint);
- if (!endpoint)
- break;
-
rem = of_graph_get_remote_port_parent(endpoint);
if (!rem) {
dev_dbg(&pdev->dev, "Remote device at %pOF not found\n",
@@ -1577,6 +1573,10 @@ vpif_capture_get_pdata(struct platform_device *pdev,
goto err_cleanup;
of_node_put(rem);
+
+ i++;
+ if (i >= VPIF_CAPTURE_NUM_CHANNELS)
+ break;
}
done:
--
2.43.0
More information about the linux-arm-kernel
mailing list