[PATCH v5 21/25] dt-bindings: media: imx258: Add binding for powerdown-gpio

[Luis Garcia]

On 5/20/24 06:50, Sakari Ailus wrote:
> On Fri, May 17, 2024 at 08:31:35AM +0000, Sakari Ailus wrote:
>> Hi Luis,
>>
>> On Wed, May 01, 2024 at 09:24:38AM -0600, git at luigi311.com wrote:
>>> From: Ondrej Jirman <megi at xff.cz>
>>>
>>> Add powerdown-gpio binding as it is required for some boards.
>>
>> I thought the conclusion was that this wasn't a property of the sensor? If
>> it needs to be controlled, then this should take place somewhere else than
>> in the sensor driver.
> 
> I'll take patches up to the previous and then 24 and 25 from this version.
> The rest will need some rework.
> 

Last time i looked at the comments for these two patch discussion was still
going on so i was submitting fixes for the other patches while this continued.
Looks like the final consensuses is for these two to be dropped so I just
submitted v6 with them both dropped. I also tested it on my PPP and it still
continues to work as expected just like it did before. Take a look at v6 and
let me know what else requires rework on there.