[PATCH v3 06/12] drm/imx: ldb: drop custom DDC bus support
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun Jun 2 05:04:46 PDT 2024
None of the boards ever supported by the upstream kernel used the custom
DDC bus support with the LDB connector. If a need arises to do so, one
should use panel-simple and its DDC bus code. Drop ddc-i2c-bus support
from the imx-ldb driver.
Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/imx/ipuv3/imx-ldb.c | 73 +++++--------------------------------
1 file changed, 10 insertions(+), 63 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
index 1924d8921c62..3f669604377e 100644
--- a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
+++ b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
@@ -25,7 +25,6 @@
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
-#include <drm/drm_edid.h>
#include <drm/drm_managed.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
@@ -70,7 +69,6 @@ struct imx_ldb_channel {
struct drm_bridge *bridge;
struct device_node *child;
- struct i2c_adapter *ddc;
int chno;
struct drm_display_mode mode;
int mode_valid;
@@ -141,18 +139,6 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector)
if (num_modes > 0)
return num_modes;
- if (imx_ldb_ch->ddc) {
- const struct drm_edid *edid = drm_edid_read_ddc(connector,
- imx_ldb_ch->ddc);
-
- if (edid) {
- drm_edid_connector_update(connector, edid);
- drm_edid_free(edid);
-
- return drm_edid_connector_add_modes(connector);
- }
- }
-
if (imx_ldb_ch->mode_valid) {
struct drm_display_mode *mode;
@@ -481,10 +467,9 @@ static int imx_ldb_register(struct drm_device *drm,
*/
drm_connector_helper_add(connector,
&imx_ldb_connector_helper_funcs);
- drm_connector_init_with_ddc(drm, connector,
- &imx_ldb_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS,
- imx_ldb_ch->ddc);
+ drm_connector_init(drm, connector,
+ &imx_ldb_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
drm_connector_attach_encoder(connector, encoder);
}
@@ -551,39 +536,6 @@ static const struct of_device_id imx_ldb_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, imx_ldb_dt_ids);
-static int imx_ldb_panel_ddc(struct device *dev,
- struct imx_ldb_channel *channel, struct device_node *child)
-{
- struct device_node *ddc_node;
- int ret;
-
- ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0);
- if (ddc_node) {
- channel->ddc = of_find_i2c_adapter_by_node(ddc_node);
- of_node_put(ddc_node);
- if (!channel->ddc) {
- dev_warn(dev, "failed to get ddc i2c adapter\n");
- return -EPROBE_DEFER;
- }
- }
-
- if (!channel->ddc) {
- /* if no DDC available, fallback to hardcoded EDID */
- dev_dbg(dev, "no ddc available\n");
-
- if (!channel->panel) {
- /* fallback to display-timings node */
- ret = of_get_drm_display_mode(child,
- &channel->mode,
- &channel->bus_flags,
- OF_USE_NATIVE_MODE);
- if (!ret)
- channel->mode_valid = 1;
- }
- }
- return 0;
-}
-
static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
{
struct drm_device *drm = data;
@@ -694,11 +646,15 @@ static int imx_ldb_probe(struct platform_device *pdev)
if (ret && ret != -ENODEV)
goto free_child;
- /* panel ddc only if there is no bridge */
- if (!channel->bridge) {
- ret = imx_ldb_panel_ddc(dev, channel, child);
+ if (!channel->bridge && !channel->panel) {
+ ret = of_get_drm_display_mode(child,
+ &channel->mode,
+ &channel->bus_flags,
+ OF_USE_NATIVE_MODE);
if (ret)
goto free_child;
+
+ channel->mode_valid = 1;
}
bus_format = of_get_bus_format(dev, child);
@@ -732,15 +688,6 @@ static int imx_ldb_probe(struct platform_device *pdev)
static void imx_ldb_remove(struct platform_device *pdev)
{
- struct imx_ldb *imx_ldb = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < 2; i++) {
- struct imx_ldb_channel *channel = &imx_ldb->channel[i];
-
- i2c_put_adapter(channel->ddc);
- }
-
component_del(&pdev->dev, &imx_ldb_ops);
}
--
2.39.2
More information about the linux-arm-kernel
mailing list