[PATCH V3 1/2] arm64: dts: imx8mp-beacon-kit: Enable ADV7535 Hot Plug Detect

[Adam Ford]

The DSI to HDMI bridge supports hot-plug-detect.The driver
supports shared GPIO IRQ pins, so it's save to enable them
which allows for hot-plug detect.

Signed-off-by: Adam Ford <aford173 at gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
V3:  Update commit message, no functional changes.

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index e5d3901f2913..da836172ae46 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -304,6 +304,8 @@ adv_bridge: hdmi at 3d {
 		compatible = "adi,adv7535";
 		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
 		reg-names = "main", "cec", "edid", "packet";
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
-- 
2.43.0