[PATCH v5 08/12] PCI: brcmstb: Don't conflate the reset rescal with phy ctrl

[Jim Quinlan]

Add a "has_phy" field indicating that the internal phy has SW control that
requires configuration.  Some previous chips only required the firing of
the "rescal" reset controller.  This change requires us to give the 7216
SoC its own cfg_data structure.

Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov at suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 1ae66c639186..4659208ae8da 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -222,6 +222,7 @@ enum pcie_type {
 struct pcie_cfg_data {
 	const int *offsets;
 	const enum pcie_type type;
+	const bool has_phy;
 	void (*perst_set)(struct brcm_pcie *pcie, u32 val);
 	void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
 };
@@ -272,6 +273,7 @@ struct brcm_pcie {
 	void			(*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
 	struct subdev_regulators *sr;
 	bool			ep_wakeup_capable;
+	bool			has_phy;
 };
 
 static inline bool is_bmips(const struct brcm_pcie *pcie)
@@ -1311,12 +1313,12 @@ static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
 
 static inline int brcm_phy_start(struct brcm_pcie *pcie)
 {
-	return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
+	return pcie->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
 }
 
 static inline int brcm_phy_stop(struct brcm_pcie *pcie)
 {
-	return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
+	return pcie->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
 }
 
 static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
@@ -1559,12 +1561,20 @@ static const struct pcie_cfg_data bcm2711_cfg = {
 	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 };
 
+static const struct pcie_cfg_data bcm7216_cfg = {
+	.offsets	= pcie_offset_bcm7278,
+	.type		= BCM7278,
+	.perst_set	= brcm_pcie_perst_set_7278,
+	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
+	.has_phy	= true,
+};
+
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
 	{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
 	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
 	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
-	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
+	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7216_cfg },
 	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
 	{ .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
 	{ .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
@@ -1612,6 +1622,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	pcie->type = data->type;
 	pcie->perst_set = data->perst_set;
 	pcie->bridge_sw_init_set = data->bridge_sw_init_set;
+	pcie->has_phy = data->has_phy;
 
 	pcie->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pcie->base))
-- 
2.17.1