[PATCH 1/7] dt-bindings: pinctrl: Add support for Broadcom STB pin controller

[Ivan T. Ivanov]

It looks like they are few revisions of this chip which varies
by number of pins. Perhaps not all of them are available on the
market. Perhaps some of them where early engineering samples,
I don't know. I decided to keep all of them just in case.

Cc: Andrea della Porta <andrea.porta at suse.com>
Signed-off-by: Ivan T. Ivanov <iivanov at suse.de>
---
 .../pinctrl/brcm,brcmstb-pinctrl.yaml         | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,brcmstb-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,brcmstb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,brcmstb-pinctrl.yaml
new file mode 100644
index 000000000000..c5afdb49d784
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,brcmstb-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,brcmstb-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB family pin controller
+
+maintainers:
+  - Ivan T. Ivanov <iivanov at suse.de>
+
+description:
+  Broadcom's STB family memory-mapped pin controller.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2712-pinctrl
+      - brcm,bcm2712-aon-pinctrl
+      - brcm,bcm2712c0-pinctrl
+      - brcm,bcm2712c0-aon-pinctrl
+      - brcm,bcm2712d0-pinctrl
+      - brcm,bcm2712d0-aon-pinctrl
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      properties:
+        function:
+          enum:
+            [
+              gpio, alt1, alt2, alt3, alt4, alt5, alt6, alt7, alt8,
+              aon_cpu_standbyb, aon_fp_4sec_resetb, aon_gpclk, aon_pwm,
+              arm_jtag, aud_fs_clk0, avs_pmu_bsc, bsc_m0, bsc_m1, bsc_m2,
+              bsc_m3, clk_observe, ctl_hdmi_5v, enet0, enet0_mii, enet0_rgmii,
+              ext_sc_clk, fl0, fl1, gpclk0, gpclk1, gpclk2, hdmi_tx0_auto_i2c,
+              hdmi_tx0_bsc, hdmi_tx1_auto_i2c, hdmi_tx1_bsc, i2s_in, i2s_out,
+              ir_in, mtsif, mtsif_alt, mtsif_alt1, pdm, pkt, pm_led_out, sc0,
+              sd0, sd2, sd_card_a, sd_card_b, sd_card_c, sd_card_d, sd_card_e,
+              sd_card_f, sd_card_g, spdif_out, spi_m, spi_s, sr_edm_sense, te0,
+              te1, tsio, uart0, uart1, uart2, usb_pwr, usb_vbus, uui, vc_i2c0,
+              vc_i2c3, vc_i2c4, vc_i2c5, vc_i2csl, vc_pcm, vc_pwm0, vc_pwm1,
+              vc_spi0, vc_spi3, vc_spi4, vc_spi5, vc_uart0, vc_uart2, vc_uart3,
+              vc_uart4,
+            ]
+
+        pins:
+          items:
+            pattern: "^((aon_)?s?gpio[0-6]?[0-9])|(emmc_(clk|cmd|dat[0-7]|ds))$"
+
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+      additionalProperties: false
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
-- 
2.43.0