[PATCH v6 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv

[CK Hu (胡俊光)]

Hi, Julien:

On Mon, 2024-07-29 at 16:48 +0200, Julien Stephan wrote:
>  	 
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>  From: Phi-bang Nguyen <pnguyen at baylibre.com>
> 
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
> 
> Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre at baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan at baylibre.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---

[snip]

> +static void mtk_camsv30_setup(struct mtk_cam_dev *cam_dev, u32 w, u32 h,
> +      u32 bpl, u32 mbus_fmt)
> +{
> +const struct mtk_cam_conf *conf = cam_dev->conf;
> +u32 int_en = INT_ST_MASK_CAMSV;
> +u32 tmp;
> +struct mtk_cam_sparams sparams;
> +
> +fmt_to_sparams(mbus_fmt, &sparams);
> +
> +if (pm_runtime_resume_and_get(cam_dev->dev) < 0) {
> +dev_err(cam_dev->dev, "failed to get pm_runtime\n");
> +return;
> +}
> +
> +writel(conf->tg_sen_mode, cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> +
> +writel((w * sparams.w_factor) << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_PXL);
> +
> +writel(h << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_LIN);
> +
> +/* YUV_U2S_DIS: disable YUV sensor unsigned to signed */
> +writel(0x1000U, cam_dev->regs_tg + CAMSV_TG_PATH_CFG);
> +
> +/* Reset cam */
> +writel(CAMSV_SW_RST, cam_dev->regs + CAMSV_SW_CTL);
> +writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> +writel(CAMSV_IMGO_RST_TRIG, cam_dev->regs + CAMSV_SW_CTL);
> +
> +readl_poll_timeout_atomic(cam_dev->regs + CAMSV_SW_CTL, tmp,
> +  (tmp == (CAMSV_IMGO_RST_TRIG | CAMSV_IMGO_RST_ST)), 10, 200);
> +
> +writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> +
> +writel(int_en, cam_dev->regs + CAMSV_INT_EN);


writel(INT_ST_MASK_CAMSV, cam_dev->regs + CAMSV_INT_EN);

int_en is used only once, so drop it.

> +
> +writel(conf->module_en | sparams.module_en_pak,

conf->module_en is 0x40000001, and sparams.module_en_pak could be 0x4 or 0x8.
The result is always zero. What does this do here?

Regards,
CK

> +       cam_dev->regs + CAMSV_MODULE_EN);
> +writel(sparams.fmt_sel, cam_dev->regs + CAMSV_FMT_SEL);
> +writel(sparams.pak, cam_dev->regs + CAMSV_PAK);
> +
> +writel(bpl - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_XSIZE);
> +writel(h - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_YSIZE);
> +
> +writel(sparams.imgo_stride | bpl, cam_dev->regs_img0 + CAMSV_IMGO_SV_STRIDE);
> +
> +writel(conf->imgo_con, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON);
> +writel(conf->imgo_con2, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON2);
> +
> +/* CMOS_EN first */
> +writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) | CAMSV_TG_SEN_MODE_CMOS_EN,
> +cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> +
> +/* finally, CAMSV_MODULE_EN : IMGO_EN */
> +writel(readl(cam_dev->regs + CAMSV_MODULE_EN) | CAMSV_MODULE_EN_IMGO_EN,
> +     cam_dev->regs + CAMSV_MODULE_EN);
> +
> +pm_runtime_put_autosuspend(cam_dev->dev);
> +}
> +
>