[PATCH 1/2] dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings

[Hui-Ping Chen]

Dear Krzysztof,

Thank you for your reply.



On 2024/7/29 下午 03:29, Krzysztof Kozlowski wrote:
> On 29/07/2024 08:15, hpchen0 wrote:
>> Add dt-bindings for USB2 PHY found on the Nuvoton MA35 SoC.
>>
>> Signed-off-by: hpchen0 <hpchen0nvt at gmail.com>
> Please use proper name.

Okay, I will make the correction and use the correct name.



>> ---
>>   .../bindings/phy/nuvoton,ma35-usb2-phy.yaml   | 51 +++++++++++++++++++
>>   1 file changed, 51 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
>> new file mode 100644
>> index 000000000000..415ea2c45975
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
>> @@ -0,0 +1,51 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/nuvoton,ma35-usb2-phy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Nuvoton MA35 USB2 phy
>> +
>> +maintainers:
>> +  - hpchen0 <hpchen0nvt at gmail.com>
> Same here

Okay, I will make the correction and use the correct name.



>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - nuvoton,ma35-usb2-phy
> All other devices have name ma35d1. Is this a different SoC?

The SoC is the same as ma35d1. I will modify ma35 to ma35d1.

Originally, I intended to create a series of shared drivers.



>> +
>> +  "#phy-cells":
>> +    const: 0
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: USB PHY clock
> Drop description, it's obvious.

Okay, I will remove the description.



>> +
>> +  clock-names:
>> +    const: usbd_gate
> Drop clock-names, you do not bring any new information.

Okay, I will remove the clock-names.



>> +
>> +  nuvoton,sys:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      phandle of the system-management node.
> Describe what is it for.

Because this driver has some status bits located in the sys, it is 
necessary to reference the sys link.



>> +
>> +required:
>> +  - compatible
>> +  - clocks
>> +  - nuvoton,sys
>> +  - "#phy-cells"
> Keep the same order as in properties.

Okay, I will correct this issue.



>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> Where do you use it?

This is not used and will be removed. Thanks for the reminder.



>> +    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
>> +
>> +    usb_phy: usb-phy {
>> +        compatible = "nuvoton,ma35-usb2-phy";
>> +        clocks = <&clk USBD_GATE>;
>> +        clock-names = "usbd_gate";
>> +        nuvoton,sys = <&sys>;
>> +        #phy-cells = <0>;
>> +    };
> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen