[PATCH v2 2/7] can: m_can: Map WoL to device_set_wakeup_enable

[Marc Kleine-Budde]

On 29.07.2024 21:27:04, Andrew Lunn wrote:
> On Mon, Jul 29, 2024 at 09:41:30AM +0200, Markus Schneider-Pargmann wrote:
> > In some devices the pins of the m_can module can act as a wakeup source.
> > This patch helps do that by connecting the PHY_WAKE WoL option to
> > device_set_wakeup_enable. By marking this device as being wakeup
> > enabled, this setting can be used by platform code to decide which
> > sleep or poweroff mode to use.
> > 
> > Also this prepares the driver for the next patch in which the pinctrl
> > settings are changed depending on the desired wakeup source.
> > 
> > Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> > ---
> >  drivers/net/can/m_can/m_can.c | 37 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> > 
> > diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> > index 81e05746d7d4..2e4ccf05e162 100644
> > --- a/drivers/net/can/m_can/m_can.c
> > +++ b/drivers/net/can/m_can/m_can.c
> > @@ -2182,6 +2182,36 @@ static int m_can_set_coalesce(struct net_device *dev,
> >  	return 0;
> >  }
> >  
> > +static void m_can_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> > +{
> > +	struct m_can_classdev *cdev = netdev_priv(dev);
> > +
> > +	wol->supported = device_can_wakeup(cdev->dev) ? WAKE_PHY : 0;
> > +	wol->wolopts = device_may_wakeup(cdev->dev) ? WAKE_PHY : 0;
> > +}
> 
> It is nice to see Ethernet WoL mapped to CAN :-)
> 
> So will any activity on the CAN BUS wake the device? Or does it need
> to be addresses to this device?

Unless you have a special filtering transceiver, which is the CAN
equivalent of a PHY, CAN interfaces usually wake up on the first
message on the bus. That message is usually lost.

Note: The details of the m_can IP core might be different.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240729/05b59971/attachment.sig>