[PATCH 1/1] arm64: dts: imx8-ss-dma: enable dma support for lpspi

[Krzysztof Kozlowski]

On 29/07/2024 11:45, Alexander Stein wrote:
> From: Clark Wang <xiaoning.wang at nxp.com>
> 
> Add DMA configurations for LPSPI nodes on i.MX8QX/QM/DXL.
> 
> Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
> Using the DMA configuration bits from downstream kernel.
> Tested on TQMa8XxS.
> 
>  arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index 1ee9496c988c5..8ae5f065b4180 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -34,6 +34,8 @@ lpspi0: spi at 5a000000 {
>  		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
>  		assigned-clock-rates = <60000000>;
>  		power-domains = <&pd IMX_SC_R_SPI_0>;
> +		dma-names = "tx","rx";

Missing spaces. Unexpected order, unless that's the coding style for imx.

Best regards,
Krzysztof