[PATCH] dt-bindings: gpio: nxp,lpc3220-gpio: Convert to dtschema
Animesh Agarwal
animeshagarwal28 at gmail.com
Sat Jul 27 06:02:35 PDT 2024
This is v2 of the same patch, sorry for missing to mention it in the commit.
On Sat, Jul 27, 2024 at 6:30 PM Animesh Agarwal
<animeshagarwal28 at gmail.com> wrote:
>
> Convert the NXP LPC3220 SoC GPIO controller bindings to DT schema format.
>
> Cc: Daniel Baluta <daniel.baluta at nxp.com>
> Signed-off-by: Animesh Agarwal <animeshagarwal28 at gmail.com>
>
> --
> Changes in v2:
> - Changed the file name to match the compatible string.
> - Removed optional from the description of '#gpio-cells' as it was wrongly
> present.
> ---
> .../devicetree/bindings/gpio/gpio_lpc32xx.txt | 43 ---------------
> .../bindings/gpio/nxp,lpc3220-gpio.yaml | 52 +++++++++++++++++++
> 2 files changed, 52 insertions(+), 43 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
> deleted file mode 100644
> index 49819367a011..000000000000
> --- a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -NXP LPC32xx SoC GPIO controller
> -
> -Required properties:
> -- compatible: must be "nxp,lpc3220-gpio"
> -- reg: Physical base address and length of the controller's registers.
> -- gpio-controller: Marks the device node as a GPIO controller.
> -- #gpio-cells: Should be 3:
> - 1) bank:
> - 0: GPIO P0
> - 1: GPIO P1
> - 2: GPIO P2
> - 3: GPIO P3
> - 4: GPI P3
> - 5: GPO P3
> - 2) pin number
> - 3) optional parameters:
> - - bit 0 specifies polarity (0 for normal, 1 for inverted)
> -- reg: Index of the GPIO group
> -
> -Example:
> -
> - gpio: gpio at 40028000 {
> - compatible = "nxp,lpc3220-gpio";
> - reg = <0x40028000 0x1000>;
> - gpio-controller;
> - #gpio-cells = <3>; /* bank, pin, flags */
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led0 {
> - gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
> - linux,default-trigger = "heartbeat";
> - default-state = "off";
> - };
> -
> - led1 {
> - gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
> - linux,default-trigger = "timer";
> - default-state = "off";
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml
> new file mode 100644
> index 000000000000..cea2f2bb2393
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/nxp,lpc3220-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP LPC3220 SoC GPIO controller
> +
> +maintainers:
> + - Animesh Agarwal <animeshagarwal28 at gmail.com>
> +
> +properties:
> + compatible:
> + const: nxp,lpc3220-gpio
> +
> + reg:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 3
> + description: |
> + 1) bank:
> + 0: GPIO P0
> + 1: GPIO P1
> + 2: GPIO P2
> + 3: GPIO P3
> + 4: GPI P3
> + 5: GPO P3
> + 2) pin number
> + 3) flags:
> + - bit 0 specifies polarity (0 for normal, 1 for inverted)
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - '#gpio-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + gpio at 40028000 {
> + compatible = "nxp,lpc3220-gpio";
> + reg = <0x40028000 0x1000>;
> + gpio-controller;
> + #gpio-cells = <3>; /* bank, pin, flags */
> + };
> --
> 2.45.2
>
More information about the linux-arm-kernel
mailing list