[PATCH v4 11/12] PCI: brcmstb: Change field name from 'type' to 'model'
Jim Quinlan
james.quinlan at broadcom.com
Thu Jul 25 13:38:12 PDT 2024
On Thu, Jul 25, 2024 at 12:58 AM Manivannan Sadhasivam
<manivannan.sadhasivam at linaro.org> wrote:
>
> On Tue, Jul 16, 2024 at 05:31:26PM -0400, Jim Quinlan wrote:
> > The 'type' field used in the driver to discern SoC differences is confusing
> > so change it to the more apt 'model'. We considered using 'family' but
> > this conflicts with Broadcom's conception of a family; for example, 7216a0
> > and 7216b0 chips are both considered separate families as each has multiple
> > derivative product chips based on the original design.
> >
>
> TBH, 'model' is also confusing :) Why can't you just use 'soc' as you are
> referrring to the SoC name.
Hello,
Well, the "model" we assign is not necessarily the same as the SoC.
If a new SoC has the same characteristics as a previous "model", we
will not create a new model but rather use the existing one. For example,
the bcm7216_cfg structure, which is for the 7216 SoC uses the model "BCM7278".
I agree that this is not crystal clear but using SoC could be
considered misleading.
Regards,
Jim Quinlan
Broadcom STB/CM
>
> - Mani
>
> > Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
> > Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>
> > ---
> > drivers/pci/controller/pcie-brcmstb.c | 42 +++++++++++++--------------
> > 1 file changed, 21 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > index 2fe1f2a26697..fa5616a56383 100644
> > --- a/drivers/pci/controller/pcie-brcmstb.c
> > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > @@ -211,7 +211,7 @@ enum {
> > PCIE_INTR2_CPU_BASE,
> > };
> >
> > -enum pcie_type {
> > +enum pcie_model {
> > GENERIC,
> > BCM7425,
> > BCM7435,
> > @@ -229,7 +229,7 @@ struct rc_bar {
> >
> > struct pcie_cfg_data {
> > const int *offsets;
> > - const enum pcie_type type;
> > + const enum pcie_model model;
> > const bool has_phy;
> > unsigned int num_inbound;
> > int (*perst_set)(struct brcm_pcie *pcie, u32 val);
> > @@ -270,7 +270,7 @@ struct brcm_pcie {
> > u64 msi_target_addr;
> > struct brcm_msi *msi;
> > const int *reg_offsets;
> > - enum pcie_type type;
> > + enum pcie_model model;
> > struct reset_control *rescal;
> > struct reset_control *perst_reset;
> > struct reset_control *bridge;
> > @@ -288,7 +288,7 @@ struct brcm_pcie {
> >
> > static inline bool is_bmips(const struct brcm_pcie *pcie)
> > {
> > - return pcie->type == BCM7435 || pcie->type == BCM7425;
> > + return pcie->model == BCM7435 || pcie->model == BCM7425;
> > }
> >
> > /*
> > @@ -852,7 +852,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> > * security considerations, and is not implemented in our modern
> > * SoCs.
> > */
> > - if (pcie->type != BCM7712)
> > + if (pcie->model != BCM7712)
> > set_bar(b++, &n, 0, 0, 0);
> >
> > resource_list_for_each_entry(entry, &bridge->dma_ranges) {
> > @@ -869,7 +869,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> > * That being said, each BARs size must still be a power of
> > * two.
> > */
> > - if (pcie->type == BCM7712)
> > + if (pcie->model == BCM7712)
> > set_bar(b++, &n, size, cpu_beg, pcie_beg);
> >
> > if (n > pcie->num_inbound)
> > @@ -886,7 +886,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> > * that enables multiple memory controllers. As such, it can return
> > * now w/o doing special configuration.
> > */
> > - if (pcie->type == BCM7712)
> > + if (pcie->model == BCM7712)
> > return n;
> >
> > ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
> > @@ -1008,7 +1008,7 @@ static void set_inbound_win_registers(struct brcm_pcie *pcie, const struct rc_ba
> > * 7712:
> > * All of their BARs need to be set.
> > */
> > - if (pcie->type == BCM7712) {
> > + if (pcie->model == BCM7712) {
> > /* BUS remap register settings */
> > reg_offset = brcm_ubus_reg_offset(i);
> > tmp = lower_32_bits(cpu_addr) & ~0xfff;
> > @@ -1036,7 +1036,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
> > return ret;
> >
> > /* Ensure that PERST# is asserted; some bootloaders may deassert it. */
> > - if (pcie->type == BCM2711) {
> > + if (pcie->model == BCM2711) {
> > ret = pcie->perst_set(pcie, 1);
> > if (ret) {
> > pcie->bridge_sw_init_set(pcie, 0);
> > @@ -1067,9 +1067,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
> > */
> > if (is_bmips(pcie))
> > burst = 0x1; /* 256 bytes */
> > - else if (pcie->type == BCM2711)
> > + else if (pcie->model == BCM2711)
> > burst = 0x0; /* 128 bytes */
> > - else if (pcie->type == BCM7278)
> > + else if (pcie->model == BCM7278)
> > burst = 0x3; /* 512 bytes */
> > else
> > burst = 0x2; /* 512 bytes */
> > @@ -1666,7 +1666,7 @@ static const int pcie_offsets_bmips_7425[] = {
> >
> > static const struct pcie_cfg_data generic_cfg = {
> > .offsets = pcie_offsets,
> > - .type = GENERIC,
> > + .model = GENERIC,
> > .perst_set = brcm_pcie_perst_set_generic,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> > .num_inbound = 3,
> > @@ -1674,7 +1674,7 @@ static const struct pcie_cfg_data generic_cfg = {
> >
> > static const struct pcie_cfg_data bcm7425_cfg = {
> > .offsets = pcie_offsets_bmips_7425,
> > - .type = BCM7425,
> > + .model = BCM7425,
> > .perst_set = brcm_pcie_perst_set_generic,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> > .num_inbound = 3,
> > @@ -1682,7 +1682,7 @@ static const struct pcie_cfg_data bcm7425_cfg = {
> >
> > static const struct pcie_cfg_data bcm7435_cfg = {
> > .offsets = pcie_offsets,
> > - .type = BCM7435,
> > + .model = BCM7435,
> > .perst_set = brcm_pcie_perst_set_generic,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> > .num_inbound = 3,
> > @@ -1690,7 +1690,7 @@ static const struct pcie_cfg_data bcm7435_cfg = {
> >
> > static const struct pcie_cfg_data bcm4908_cfg = {
> > .offsets = pcie_offsets,
> > - .type = BCM4908,
> > + .model = BCM4908,
> > .perst_set = brcm_pcie_perst_set_4908,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> > .num_inbound = 3,
> > @@ -1706,7 +1706,7 @@ static const int pcie_offset_bcm7278[] = {
> >
> > static const struct pcie_cfg_data bcm7278_cfg = {
> > .offsets = pcie_offset_bcm7278,
> > - .type = BCM7278,
> > + .model = BCM7278,
> > .perst_set = brcm_pcie_perst_set_7278,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> > .num_inbound = 3,
> > @@ -1714,7 +1714,7 @@ static const struct pcie_cfg_data bcm7278_cfg = {
> >
> > static const struct pcie_cfg_data bcm2711_cfg = {
> > .offsets = pcie_offsets,
> > - .type = BCM2711,
> > + .model = BCM2711,
> > .perst_set = brcm_pcie_perst_set_generic,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> > .num_inbound = 3,
> > @@ -1722,7 +1722,7 @@ static const struct pcie_cfg_data bcm2711_cfg = {
> >
> > static const struct pcie_cfg_data bcm7216_cfg = {
> > .offsets = pcie_offset_bcm7278,
> > - .type = BCM7278,
> > + .model = BCM7278,
> > .perst_set = brcm_pcie_perst_set_7278,
> > .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> > .has_phy = true,
> > @@ -1779,7 +1779,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > pcie->dev = &pdev->dev;
> > pcie->np = np;
> > pcie->reg_offsets = data->offsets;
> > - pcie->type = data->type;
> > + pcie->model = data->model;
> > pcie->perst_set = data->perst_set;
> > pcie->bridge_sw_init_set = data->bridge_sw_init_set;
> > pcie->has_phy = data->has_phy;
> > @@ -1848,7 +1848,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > goto fail;
> >
> > pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
> > - if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
> > + if (pcie->model == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
> > dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
> > ret = -ENODEV;
> > goto fail;
> > @@ -1863,7 +1863,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > }
> > }
> >
> > - bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
> > + bridge->ops = pcie->model == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
> > bridge->sysdata = pcie;
> >
> > platform_set_drvdata(pdev, pcie);
> > --
> > 2.17.1
> >
>
>
>
> --
> மணிவண்ணன் சதாசிவம்
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4210 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240725/3258af2c/attachment.p7s>
More information about the linux-arm-kernel
mailing list