[PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC

[Manivannan Sadhasivam]

On Tue, Jul 16, 2024 at 05:31:15PM -0400, Jim Quinlan wrote:
> V4 Changes:
>   o Commit "Check return value of all reset_control_xxx calls"
>     -- Blank line before "return" (Stan)
>   o Commit "Use common error handling code in brcmstb_probe()"
>     -- Drop the "Fixes" tag (Stan)
>   o Commit "dt-bindings: PCI ..."
>     -- Separate the main commit into two: cleanup and adding the
>        7712 SoC (Krzysztof)
>     -- Fold maintainer change commit into cleanup change (Krzysztof)
>     -- Use minItems/maxItems where appropriate (Krzysztof)
>     -- Consistent order of resets/reset-names in decl and usage
>        (Krzysztof)
> 

Rpi mailing list owners: Could you please make the list 'unmoderated'? I haven't
subscribe to this list, so I just keep getting the 'Your message to
linux-rpi-kernel awaits moderator approval' for every review comment I post,
which is a spam to me.

Also I won't subscribe to this list unless I work on Rpi. So using moderated
list in LKML is just spamming the reviewers.

- Mani

> V3 Changes:
>   o Commit "Enable 7712 SOCs"
>     -- Move "model" check from outside to inside func (Stan)
>   o Commit "Check return value of all reset_control_xxx calls"
>     -- Propagate errors up the chain instead of ignoring them (Stan)
>   o Commit "Refactor for chips with many regular inbound BARs"
>     -- Nine suggestions given, nine implemented (Stan)
>   o Commit "Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
>     -- Drop tab, add parens around macro params in expression (Stan)
>   o Commit "Use swinit reset if available"
>     -- Treat swinit the same as other reset controllers (Stan)
>        Stan suggested to use dev_err_probe() for getting resources
>        but I will defer that to future series (if that's okay).
>   o Commit "Get resource before we start asserting resets"
>     -- Squash this with previous commit (Stan)
>   o Commit "Use "clk_out" error path label"
>     -- Move clk_prepare_enable() after getting resouurces (Stan)
>     -- Change subject to "Use more common error handling code in
>        brcm_pcie_probe()" (Markus)
>     -- Use imperative commit description (Markus)
>     -- "Fixes:" tag added for missing error return. (Markus)
>   o Commit "dt-bindings: PCI ..."
>     -- Split off maintainer change in separate commit.
>     -- Tried to accomodate Krzysztof's requests, I'm not sure I
>        have succeeded.  Krzysztof, please see [1] below.
>   
>   [1] Wrt the YAML of brcmstb PCIe resets, here is what I am trying
>       to describe:
> 
>       CHIP       NUM_RESETS    NAMES
>       ====       ==========    =====
>       4908       1             perst
>       7216       1             rescal
>       7712       3             rescal, bridge, swinit
>       Others     0             -
> 
> 
> V2 Changes (note: four new commits):
>   o Commit "dt-bindings: PCI ..."
>     -- s/Adds/Add/, fix spelling error (Bjorn)
>     -- Order compatible strings alphabetically (Krzysztof)
>     -- Give definitions first then rules (Krzysztof)
>     -- Add reason for change in maintainer (Krzysztof)
>   o Commit "Use swinit reset if available"
>     -- no need for "else" clause (Philipp)
>     -- fix improper use of dev_err_probe() (Philipp) 
>   o Commit "Use "clk_out" error path label"
>     -- Improve commit message (Bjorn)
>   o Commit "PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
>     -- Improve commit subject line (Bjorn)
>   o Commit (NEW) -- Change field name from 'type' to 'model'
>     -- Added as requested (Stanimir)
>   o Commit (NEW) -- Check return value of all reset_control_xxx calls
>     -- Added as requested (Stanimir)
>   o Commit (NEW) "Get resource before we start asserting reset controllers"
>     -- Added as requested (Stanimir)
>   o Commit (NEW) -- "Remove two unused constants from driver"
> 
> 
> V1:
>   This submission is for the Broadcom STB 7712, sibling SOC of the RPi5 chip.
>   Stanimir has already submitted a patch "Add PCIe support for bcm2712" for
>   the RPi version of the SOC.  It is hoped that Stanimir will allow us to
>   submit this series first and subsequently rebase his patch(es).
> 
>   The largest commit, "Refactor for chips with many regular inbound BARs"
>   affects both the STB and RPi SOCs.  It allows for multiple inbound ranges
>   where previously only one was effectively used.  This feature will also
>   be present in future STB chips, as well as Broadcom's Cable Modem group.
> 
> Jim Quinlan (12):
>   dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC
>   dt-bindings: PCI: brcmstb: Add 7712 SoC description
>   PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
>   PCI: brcmstb: Use bridge reset if available
>   PCI: brcmstb: Use swinit reset if available
>   PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets
>     SoC-specific
>   PCI: brcmstb: Remove two unused constants from driver
>   PCI: brcmstb: Don't conflate the reset rescal with phy ctrl
>   PCI: brcmstb: Refactor for chips with many regular inbound BARs
>   PCI: brcmstb: Check return value of all reset_control_xxx calls
>   PCI: brcmstb: Change field name from 'type' to 'model'
>   PCI: brcmstb: Enable 7712 SOCs
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |  50 +-
>  drivers/pci/controller/pcie-brcmstb.c         | 485 +++++++++++++-----
>  2 files changed, 400 insertions(+), 135 deletions(-)
> 
> 
> base-commit: 55027e689933ba2e64f3d245fb1ff185b3e7fc81
> -- 
> 2.17.1
> 



-- 
மணிவண்ணன் சதாசிவம்