[PATCH v4 1/2] dt-bindings: arm: Add device-name in the coresight components

[Krzysztof Kozlowski]

On 03/07/2024 14:23, Mao Jinlong wrote:
> Current name of coresight component's folder consists of prefix of
> the device and the id in the device list. When run 'ls' command,
> we can get the register address of the device. Take CTI for example,
> if we want to set the config for modem CTI, but we can't know which
> CTI is modem CTI from all current information.
> 
> cti_sys0 -> ../../../devices/platform/soc at 0/138f0000.cti/cti_sys0
> cti_sys1 -> ../../../devices/platform/soc at 0/13900000.cti/cti_sys1
> 
> Add device-name in device tree which can provide a better description
> of the coresight device. It can provide the info like the system or
> HW it belongs to.
> 
> Signed-off-by: Mao Jinlong <quic_jinlmao at quicinc.com>
> ---
>  .../devicetree/bindings/arm/arm,coresight-cti.yaml          | 6 ++++++
>  .../devicetree/bindings/arm/arm,coresight-dummy-source.yaml | 6 ++++++
>  .../devicetree/bindings/arm/arm,coresight-stm.yaml          | 6 ++++++
>  .../devicetree/bindings/arm/qcom,coresight-tpdm.yaml        | 6 ++++++
>  4 files changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 2d5545a2b49c..6a73eaa66a42 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -98,6 +98,12 @@ properties:
>    power-domains:
>      maxItems: 1
>  
> +  arm,cs-dev-name:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Define the name which can describe what kind of HW or system the
> +      coresight device belongs to.

Don't we use already label for such cases? Power domains, input, leds,
panels, IIO, hwmon and more.

Best regards,
Krzysztof