[PATCH v2 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint

[Hongxing Zhu]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: 2024年7月24日 14:07
> To: Hongxing Zhu <hongxing.zhu at nxp.com>; robh at kernel.org;
> krzk+dt at kernel.org; conor+dt at kernel.org; shawnguo at kernel.org;
> l.stach at pengutronix.de
> Cc: devicetree at vger.kernel.org; linux-pci at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> kernel at pengutronix.de; imx at lists.linux.dev
> Subject: Re: [PATCH v2 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and
> "atu" for i.MX8M PCIe Endpoint
> 
> On 24/07/2024 05:03, Richard Zhu wrote:
> > Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
> 
> This we see in the diff. What I do not see is why? Hardware changed? How come?
> 
For i.MX8M PCIe EP, the dbi2 and atu address are pre-defined in the driver.
This method is not good.
In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly.
This series is preparation to do that for i.MX8M PCIe EP.

Best Regards
Richard Zhu
> 
> Best regards,
> Krzysztof