[PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings

[Rob Herring]

On Tue, Jul 23, 2024 at 07:33:30AM +0900, Sunyeal Hong wrote:
> Add dt-schema for ExynosAuto v920 SoC clock controller.
> Add device tree clock binding definitions for below CMU blocks.
> 
> - CMU_TOP
> - CMU_PERIC0
> 
> Signed-off-by: Sunyeal Hong <sunyeal.hong at samsung.com>
> ---
>  .../clock/samsung,exynosautov920-clock.yaml   | 115 +++++++++++
>  .../clock/samsung,exynosautov920.h            | 191 ++++++++++++++++++
>  2 files changed, 306 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
>  create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
> new file mode 100644
> index 000000000000..90f9f17da959
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung ExynosAuto v920 SoC clock controller
> +
> +maintainers:
> +  - Sunyeal Hong <sunyeal.hong at samsung.com>
> +  - Chanwoo Choi <cw00.choi at samsung.com>
> +  - Krzysztof Kozlowski <krzk at kernel.org>
> +  - Sylwester Nawrocki <s.nawrocki at samsung.com>
> +
> +description: |
> +  ExynosAuto v920 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. Root clocks in that clock tree are
> +  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
> +  The external OSCCLK must be defined as fixed-rate clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other clocks of function blocks (other CMUs) are usually
> +  derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'include/dt-bindings/clock/samsung,exynosautov920.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,exynosautov920-cmu-top
> +      - samsung,exynosautov920-cmu-peric0
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3

Move the descriptions and names here. Then in the if/then schemas just 
set the number of items to 1 or 3 as appropriate.

Rob