[PATCH v1] arm64: dts: mediatek: mt7988: add labels for different nodes

[AngeloGioacchino Del Regno]

Il 09/07/24 10:16, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Current devicetree-nodes missing a label which allows to add aproperties
> or phandles to them, so add them.
> 
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> Fixes: 660c230bf302 ("arm64: dts: mediatek: mt7988: add I2C controllers")
> Fixes: 09ff2216a035 ("arm64: dts: mediatek: mt7988: add PWM controller")
> Fixes: 09346afaba0a ("arm64: dts: mediatek: mt7988: add XHCI controllers")
> Fixes: b616b403cbff ("arm64: dts: mediatek: mt7988: add clock controllers")
> Fixes: 6c1d134a103f ("arm64: dts: mediatek: Add initial MT7988A and BPI-R4")

You're just only adding node labels, what does this actually fix?!?

Besides, I could tell you to remove the Fixes tags, but then, there's still nothing
using those node labels - so there's nothing justifying this addition, at all.

I guess that you want to use those (bar the cpu[0-3] labels, which you're adding
because... uhh.. why?) from some board DT... so please just do that: send a commit
adding your board DT and adding the required node label(s) here as a consequence.

Cheers,
Angelo

> ---
>   arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 32 +++++++++++------------
>   1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> index aa728331e876..9ced005b1595 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> @@ -14,28 +14,28 @@ cpus {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
>   
> -		cpu at 0 {
> +		cpu0: cpu at 0 {
>   			compatible = "arm,cortex-a73";
>   			reg = <0x0>;
>   			device_type = "cpu";
>   			enable-method = "psci";
>   		};
>   
> -		cpu at 1 {
> +		cpu1: cpu at 1 {
>   			compatible = "arm,cortex-a73";
>   			reg = <0x1>;
>   			device_type = "cpu";
>   			enable-method = "psci";
>   		};
>   
> -		cpu at 2 {
> +		cpu2: cpu at 2 {
>   			compatible = "arm,cortex-a73";
>   			reg = <0x2>;
>   			device_type = "cpu";
>   			enable-method = "psci";
>   		};
>   
> -		cpu at 3 {
> +		cpu3: cpu at 3 {
>   			compatible = "arm,cortex-a73";
>   			reg = <0x3>;
>   			device_type = "cpu";
> @@ -43,7 +43,7 @@ cpu at 3 {
>   		};
>   	};
>   
> -	oscillator-40m {
> +	system_clk: oscillator-40m {
>   		compatible = "fixed-clock";
>   		clock-frequency = <40000000>;
>   		#clock-cells = <0>;
> @@ -86,7 +86,7 @@ infracfg: clock-controller at 10001000 {
>   			#clock-cells = <1>;
>   		};
>   
> -		clock-controller at 1001b000 {
> +		topckgen: clock-controller at 1001b000 {
>   			compatible = "mediatek,mt7988-topckgen", "syscon";
>   			reg = <0 0x1001b000 0 0x1000>;
>   			#clock-cells = <1>;
> @@ -99,13 +99,13 @@ watchdog: watchdog at 1001c000 {
>   			#reset-cells = <1>;
>   		};
>   
> -		clock-controller at 1001e000 {
> +		apmixedsys: clock-controller at 1001e000 {
>   			compatible = "mediatek,mt7988-apmixedsys";
>   			reg = <0 0x1001e000 0 0x1000>;
>   			#clock-cells = <1>;
>   		};
>   
> -		pwm at 10048000 {
> +		pwm: pwm at 10048000 {
>   			compatible = "mediatek,mt7988-pwm";
>   			reg = <0 0x10048000 0 0x1000>;
>   			clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
> @@ -124,7 +124,7 @@ pwm at 10048000 {
>   			status = "disabled";
>   		};
>   
> -		i2c at 11003000 {
> +		i2c0: i2c at 11003000 {
>   			compatible = "mediatek,mt7981-i2c";
>   			reg = <0 0x11003000 0 0x1000>,
>   			      <0 0x10217080 0 0x80>;
> @@ -137,7 +137,7 @@ i2c at 11003000 {
>   			status = "disabled";
>   		};
>   
> -		i2c at 11004000 {
> +		i2c1: i2c at 11004000 {
>   			compatible = "mediatek,mt7981-i2c";
>   			reg = <0 0x11004000 0 0x1000>,
>   			      <0 0x10217100 0 0x80>;
> @@ -150,7 +150,7 @@ i2c at 11004000 {
>   			status = "disabled";
>   		};
>   
> -		i2c at 11005000 {
> +		i2c2: i2c at 11005000 {
>   			compatible = "mediatek,mt7981-i2c";
>   			reg = <0 0x11005000 0 0x1000>,
>   			      <0 0x10217180 0 0x80>;
> @@ -163,7 +163,7 @@ i2c at 11005000 {
>   			status = "disabled";
>   		};
>   
> -		usb at 11190000 {
> +		ssusb0: usb at 11190000 {
>   			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
>   			reg = <0 0x11190000 0 0x2e00>,
>   			      <0 0x11193e00 0 0x0100>;
> @@ -177,7 +177,7 @@ usb at 11190000 {
>   			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
>   		};
>   
> -		usb at 11200000 {
> +		ssusb1: usb at 11200000 {
>   			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
>   			reg = <0 0x11200000 0 0x2e00>,
>   			      <0 0x11203e00 0 0x0100>;
> @@ -191,21 +191,21 @@ usb at 11200000 {
>   			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
>   		};
>   
> -		clock-controller at 11f40000 {
> +		xfi_pll: clock-controller at 11f40000 {
>   			compatible = "mediatek,mt7988-xfi-pll";
>   			reg = <0 0x11f40000 0 0x1000>;
>   			resets = <&watchdog 16>;
>   			#clock-cells = <1>;
>   		};
>   
> -		clock-controller at 15000000 {
> +		ethsys: clock-controller at 15000000 {
>   			compatible = "mediatek,mt7988-ethsys", "syscon";
>   			reg = <0 0x15000000 0 0x1000>;
>   			#clock-cells = <1>;
>   			#reset-cells = <1>;
>   		};
>   
> -		clock-controller at 15031000 {
> +		ethwarp: clock-controller at 15031000 {
>   			compatible = "mediatek,mt7988-ethwarp";
>   			reg = <0 0x15031000 0 0x1000>;
>   			#clock-cells = <1>;