[PATCH 12/17] mm: introduce numa_memblks
Jonathan Cameron
Jonathan.Cameron at Huawei.com
Fri Jul 19 11:16:47 PDT 2024
On Tue, 16 Jul 2024 14:13:41 +0300
Mike Rapoport <rppt at kernel.org> wrote:
> From: "Mike Rapoport (Microsoft)" <rppt at kernel.org>
>
> Move code dealing with numa_memblks from arch/x86 to mm/ and add Kconfig
> options to let x86 select it in its Kconfig.
>
> This code will be later reused by arch_numa.
>
> No functional changes.
>
> Signed-off-by: Mike Rapoport (Microsoft) <rppt at kernel.org>
Hi Mike,
My only real concern in here is there are a few places where
the lifted code makes changes to memblocks that are x86 only today.
I need to do some more digging to work out if those are safe
in all cases.
Jonathan
> +/**
> + * numa_cleanup_meminfo - Cleanup a numa_meminfo
> + * @mi: numa_meminfo to clean up
> + *
> + * Sanitize @mi by merging and removing unnecessary memblks. Also check for
> + * conflicts and clear unused memblks.
> + *
> + * RETURNS:
> + * 0 on success, -errno on failure.
> + */
> +int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
> +{
> + const u64 low = 0;
Given always zero, why not just use that value inline?
> + const u64 high = PFN_PHYS(max_pfn);
> + int i, j, k;
> +
> + /* first, trim all entries */
> + for (i = 0; i < mi->nr_blks; i++) {
> + struct numa_memblk *bi = &mi->blk[i];
> +
> + /* move / save reserved memory ranges */
> + if (!memblock_overlaps_region(&memblock.memory,
> + bi->start, bi->end - bi->start)) {
> + numa_move_tail_memblk(&numa_reserved_meminfo, i--, mi);
> + continue;
> + }
> +
> + /* make sure all non-reserved blocks are inside the limits */
> + bi->start = max(bi->start, low);
> +
> + /* preserve info for non-RAM areas above 'max_pfn': */
> + if (bi->end > high) {
> + numa_add_memblk_to(bi->nid, high, bi->end,
> + &numa_reserved_meminfo);
> + bi->end = high;
> + }
> +
> + /* and there's no empty block */
> + if (bi->start >= bi->end)
> + numa_remove_memblk_from(i--, mi);
> + }
> +
> + /* merge neighboring / overlapping entries */
> + for (i = 0; i < mi->nr_blks; i++) {
> + struct numa_memblk *bi = &mi->blk[i];
> +
> + for (j = i + 1; j < mi->nr_blks; j++) {
> + struct numa_memblk *bj = &mi->blk[j];
> + u64 start, end;
> +
> + /*
> + * See whether there are overlapping blocks. Whine
> + * about but allow overlaps of the same nid. They
> + * will be merged below.
> + */
> + if (bi->end > bj->start && bi->start < bj->end) {
> + if (bi->nid != bj->nid) {
> + pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
> + bi->nid, bi->start, bi->end - 1,
> + bj->nid, bj->start, bj->end - 1);
> + return -EINVAL;
> + }
> + pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
> + bi->nid, bi->start, bi->end - 1,
> + bj->start, bj->end - 1);
> + }
> +
> + /*
> + * Join together blocks on the same node, holes
> + * between which don't overlap with memory on other
> + * nodes.
> + */
> + if (bi->nid != bj->nid)
> + continue;
> + start = min(bi->start, bj->start);
> + end = max(bi->end, bj->end);
> + for (k = 0; k < mi->nr_blks; k++) {
> + struct numa_memblk *bk = &mi->blk[k];
> +
> + if (bi->nid == bk->nid)
> + continue;
> + if (start < bk->end && end > bk->start)
> + break;
> + }
> + if (k < mi->nr_blks)
> + continue;
> + pr_info("NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n",
> + bi->nid, bi->start, bi->end - 1, bj->start,
> + bj->end - 1, start, end - 1);
> + bi->start = start;
> + bi->end = end;
> + numa_remove_memblk_from(j--, mi);
> + }
> + }
> +
> + /* clear unused ones */
> + for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
> + mi->blk[i].start = mi->blk[i].end = 0;
> + mi->blk[i].nid = NUMA_NO_NODE;
> + }
> +
> + return 0;
> +}
...
> +/*
> + * Mark all currently memblock-reserved physical memory (which covers the
> + * kernel's own memory ranges) as hot-unswappable.
> + */
> +static void __init numa_clear_kernel_node_hotplug(void)
This will be a change for non x86 architectures. 'should' be fine
but I'm not 100% sure.
> +{
> + nodemask_t reserved_nodemask = NODE_MASK_NONE;
> + struct memblock_region *mb_region;
> + int i;
> +
> + /*
> + * We have to do some preprocessing of memblock regions, to
> + * make them suitable for reservation.
> + *
> + * At this time, all memory regions reserved by memblock are
> + * used by the kernel, but those regions are not split up
> + * along node boundaries yet, and don't necessarily have their
> + * node ID set yet either.
> + *
> + * So iterate over all memory known to the x86 architecture,
Comment needs an update at least given not x86 specific any more.
> + * and use those ranges to set the nid in memblock.reserved.
> + * This will split up the memblock regions along node
> + * boundaries and will set the node IDs as well.
> + */
> + for (i = 0; i < numa_meminfo.nr_blks; i++) {
> + struct numa_memblk *mb = numa_meminfo.blk + i;
> + int ret;
> +
> + ret = memblock_set_node(mb->start, mb->end - mb->start,
> + &memblock.reserved, mb->nid);
> + WARN_ON_ONCE(ret);
> + }
> +
> + /*
> + * Now go over all reserved memblock regions, to construct a
> + * node mask of all kernel reserved memory areas.
> + *
> + * [ Note, when booting with mem=nn[kMG] or in a kdump kernel,
> + * numa_meminfo might not include all memblock.reserved
> + * memory ranges, because quirks such as trim_snb_memory()
> + * reserve specific pages for Sandy Bridge graphics. ]
> + */
> + for_each_reserved_mem_region(mb_region) {
> + int nid = memblock_get_region_node(mb_region);
> +
> + if (nid != MAX_NUMNODES)
> + node_set(nid, reserved_nodemask);
> + }
> +
> + /*
> + * Finally, clear the MEMBLOCK_HOTPLUG flag for all memory
> + * belonging to the reserved node mask.
> + *
> + * Note that this will include memory regions that reside
> + * on nodes that contain kernel memory - entire nodes
> + * become hot-unpluggable:
> + */
> + for (i = 0; i < numa_meminfo.nr_blks; i++) {
> + struct numa_memblk *mb = numa_meminfo.blk + i;
> +
> + if (!node_isset(mb->nid, reserved_nodemask))
> + continue;
> +
> + memblock_clear_hotplug(mb->start, mb->end - mb->start);
> + }
> +}
More information about the linux-arm-kernel
mailing list