[PATCH 3/6] drivers/thermal/exynos: check IS_ERR(data->clk) consistently

[Mateusz Majewski]

This will be needed for Exynos 850 support, which does not require this
clock.

It would also be possible to set data->clk to NULL instead, but doing it
like this is consistent with what we do with data->clk_sec.

Signed-off-by: Mateusz Majewski <m.majewski2 at samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c | 58 ++++++++++++++++++----------
 1 file changed, 38 insertions(+), 20 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 61606a9b9a00..f0de72a62fd7 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -257,7 +257,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	int ret = 0;
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 	if (!IS_ERR(data->clk_sec))
 		clk_enable(data->clk_sec);
 
@@ -271,7 +272,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 	if (!IS_ERR(data->clk_sec))
 		clk_disable(data->clk_sec);
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
 	return ret;
@@ -295,11 +297,13 @@ static int exynos_thermal_zone_configure(struct platform_device *pdev)
 	}
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 
 	data->tmu_set_crit_temp(data, temp / MCELSIUS);
 
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
 	return 0;
@@ -328,10 +332,12 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 	data->tmu_control(pdev, on);
 	data->enabled = on;
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 }
 
@@ -648,7 +654,8 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
 		return -EAGAIN;
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 
 	value = data->tmu_read(data);
 	if (value < 0)
@@ -656,7 +663,8 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
 	else
 		*temp = code_to_temp(data, value) * MCELSIUS;
 
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
 	return ret;
@@ -723,9 +731,11 @@ static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
 		goto out;
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 	data->tmu_set_emulation(data, temp);
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 	return 0;
 out:
@@ -763,12 +773,14 @@ static irqreturn_t exynos_tmu_threaded_irq(int irq, void *id)
 	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 
 	/* TODO: take action based on particular interrupt */
 	data->tmu_clear_irqs(data);
 
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
 	return IRQ_HANDLED;
@@ -979,7 +991,8 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
 	struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
 
 	mutex_lock(&data->lock);
-	clk_enable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_enable(data->clk);
 
 	if (low > INT_MIN)
 		data->tmu_set_low_temp(data, low / MCELSIUS);
@@ -990,7 +1003,8 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
 	else
 		data->tmu_disable_high(data);
 
-	clk_disable(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
 	return 0;
@@ -1053,10 +1067,12 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_prepare(data->clk);
-	if (ret) {
-		dev_err(dev, "Failed to get clock\n");
-		goto err_clk_sec;
+	if (!IS_ERR(data->clk)) {
+		ret = clk_prepare(data->clk);
+		if (ret) {
+			dev_err(dev, "Failed to get clock\n");
+			goto err_clk_sec;
+		}
 	}
 
 	switch (data->soc) {
@@ -1113,7 +1129,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 err_sclk:
 	clk_disable_unprepare(data->sclk);
 err_clk:
-	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_unprepare(data->clk);
 err_clk_sec:
 	if (!IS_ERR(data->clk_sec))
 		clk_unprepare(data->clk_sec);
@@ -1127,7 +1144,8 @@ static void exynos_tmu_remove(struct platform_device *pdev)
 	exynos_tmu_control(pdev, false);
 
 	clk_disable_unprepare(data->sclk);
-	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk))
+		clk_unprepare(data->clk);
 	if (!IS_ERR(data->clk_sec))
 		clk_unprepare(data->clk_sec);
 }
-- 
2.45.1