[PATCH 2/3] arm64: dts: ti: k3-am625-beagleplay: Add boot-gpios to cc1352p7

[Ayush Singh]

Add boot-gpios which is required for enabling bootloader backdoor for
flashing firmware to cc1352p7.

Also fix the incorrect reset-gpio.

Signed-off-by: Ayush Singh <ayush at beagleboard.org>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 70de288d728e..6c9d1dc26379 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -888,7 +888,8 @@ &main_uart6 {
 
 	mcu {
 		compatible = "ti,cc1352p7";
-		reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+		boot-gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&main_gpio0 14 GPIO_ACTIVE_HIGH>;
 		vdds-supply = <&vdd_3v3>;
 	};
 };

-- 
2.45.2