[PATCH v3 5/6] arm64: dts: amlogic: t7: add ao secure node

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao at amlogic.com>

Add node for board info registers, which allows getting SoC family and
board revision.

For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic T7 SoC:
soc soc0: Amlogic T7 (A311D2) Revision 36:c (1:1) Detected.

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index c23efc6c7ac0..ec743cad57db 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -194,6 +194,14 @@ uart_a: serial at 78000 {
 				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure at 10220 {
+				compatible = "amlogic,t7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 
 	};

-- 
2.37.1