[PATCH v10 23/27] ARM: dts: aspeed: yosemite4: add fan led config
Delphine CC Chiu
Delphine_CC_Chiu at wiwynn.com
Thu Jul 18 22:58:52 PDT 2024
Set fan led config in yosemite4 DTS.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 152 +++++++++++++++++-
1 file changed, 150 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 21ca22281ef8..2cbb210ed53e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -75,6 +75,154 @@ tpmdev at 0 {
reg = <0>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan0_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan1_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan1_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan2_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan2_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan3_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan3_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan4_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan4_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan5_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan5_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan6_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan6_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan7_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan7_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan8_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan8_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan9_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan9_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan10_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan10_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan11_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan11_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&uart1 {
@@ -1198,7 +1346,7 @@ eeprom at 52 {
reg = <0x52>;
};
- gpio at 61 {
+ led_gpio0: gpio at 61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
@@ -1268,7 +1416,7 @@ eeprom at 52 {
reg = <0x52>;
};
- gpio at 61 {
+ led_gpio1: gpio at 61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
--
2.25.1
More information about the linux-arm-kernel
mailing list