[PATCH v2 3/3] arm64: dts: rockchip: add Firefly JD4 baseboard with Core-PX30-JD4 SoM

[Dragan Simic]

Hello Christopher,

On 2024-07-17 18:47, Christopher Obbard wrote:
> The Firefly MB-PX30-JD4 is a baseboard for the Core-PX30-JD4 SoM.
> 
> Signed-off-by: Christopher Obbard <chris.obbard at collabora.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile             |   1 +
>  arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts | 178 
> ++++++++++++++++++++++
>  2 files changed, 179 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> b/arch/arm64/boot/dts/rockchip/Makefile
> index fda1b980eb4bc..24e1e5b606876 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts
> b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts
> new file mode 100644
> index 0000000000000..bb79a7eb9f028
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4.dts
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include "px30-firefly-jd4-core.dtsi"
> +
> +/ {
> +	model = "Firefly Core-PX30-JD4 with MB-JD4-PX30 baseboard";

Technically, it's s/with/on/

> +	compatible = "firefly,px30-mb-jd4", "firefly,px30-core-jd4", 
> "rockchip,px30";
> +
> +	aliases {
> +		ethernet0 = &gmac;
> +		mmc0 = &sdmmc;
> +		mmc1 = &sdio;
> +		mmc2 = &emmc;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +
> +	dc_12v: dc-12v-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "dc_12v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 2>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1500000>;
> +		poll-interval = <100>;
> +
> +		button-recovery {
> +			label = "Recovery";
> +			linux,code = <KEY_VENDOR>;
> +			press-threshold-microvolt = <18000>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&blue_led>, <&green_led>;
> +
> +		blue-led {
> +			color = <LED_COLOR_ID_BLUE>;
> +			default-state = "on";
> +			function = LED_FUNCTION_HEARTBEAT;
> +			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
> +			label = "px30-mb-jd4:blue:work";
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		green-led {
> +			color = <LED_COLOR_ID_GREEN>;
> +			default-state = "on";
> +			function = LED_FUNCTION_POWER;
> +			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
> +			label = "px30-mb-jd4:blue:diy";
> +			linux,default-trigger = "default-on";
> +		};
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_enable_h>;
> +
> +		/*
> +		 * On the module itself this is one of these (depending
> +		 * on the actual card populated):
> +		 * - SDIO_RESET_L_WL_REG_ON
> +		 * - PDN (power down when low)
> +		 */
> +		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
> +	};
> +
> +	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_baseboard";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_12v>;
> +	};
> +};
> +
> +&gmac {
> +	clock_in_out = "output";
> +	phy-supply = <&vcc_rmii>;
> +	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 50000 50000>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	leds {
> +		blue_led: blue-led {
> +			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		green_led: green-led {
> +			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	sdio-pwrseq {
> +		wifi_enable_h: wifi-enable-h {
> +			rockchip,pins =
> +				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	card-detect-delay = <800>;
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	status = "okay";
> +};
> +
> +&sdio {
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	keep-power-in-suspend;
> +	non-removable;
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +	sd-uhs-sdr104;
> +	status = "okay";
> +};
> +
> +&u2phy {
> +	status = "okay";
> +
> +	u2phy_host: host-port {
> +		status = "okay";
> +	};
> +
> +	u2phy_otg: otg-port {
> +		status = "okay";
> +	};
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2m1_xfer>;
> +	status = "okay";
> +};
> +
> +&usb20_otg {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};